why does my Toyota Camry Eighth Generation (2018-present) shake while driving

Toyota Camry Eighth Generation (2018-present)

Error Codes

2-4 hours

Time

medium

Difficulty

medium

Severity

3 min read

471 words

Problem Statement

Learn how to diagnose and fix shaking issues in your Toyota Camry. Step-by-step guide with symptoms, diagnostic steps, and repair instructions.

Affected Component

Suspension

Estimated Time

2-4 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

•Ensure the vehicle is securely on jack stands before working underneath.
•Always wear safety gloves and goggles when handling tools and equipment.

Symptoms

•Steering wheel vibrations at certain speeds
•Shaking felt through the seat or floor
•Uneven tire wear
•Pulling to one side while driving
•Increased road noise

Diagnostic Steps

1
Inspect tire condition and pressure for uneven wear or low pressure.
2
Check wheel alignment using a professional alignment machine.
3
Balance the wheels to eliminate vibrations caused by unbalanced tires.
4
Inspect suspension components for wear or damage, including struts and bushings.
5
Check for loose or damaged engine or transmission mounts.

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•Tire pressure gauge
•Wheel balancer
•Alignment machine
•Jack
•Jack stands
•Socket set

Parts Required

•Tires (if worn)
•Suspension components (if damaged)

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Inspect tire condition and pressure for uneven wear or low pressure.
2
Check wheel alignment using a professional alignment machine.
3
Balance the wheels to eliminate vibrations caused by unbalanced tires.
4
Inspect suspension components for wear or damage, including struts and bushings.
5
Check for loose or damaged engine or transmission mounts.

Solution

1. Preparation

Gather tools and parts required for the repair.
Ensure the vehicle is parked on a flat surface and the engine is turned off.
Wear safety gloves and goggles.

2. Inspect and Adjust Tire Pressure

Tools Required: Tire pressure gauge
Sub-steps:
1. Remove valve caps from each tire.
2. Use the tire pressure gauge to check the pressure.
3. Inflate tires to the manufacturer's recommended pressure if low.
4. Replace valve caps securely.

3. Wheel Balancing

Tools Required: Wheel balancer
Sub-steps:
1. Remove the wheels from the vehicle.
2. Mount each wheel on the wheel balancer.
3. Follow the machine's instructions to balance each wheel.
4. Reinstall the balanced wheels onto the vehicle.

4. Wheel Alignment

Tools Required: Alignment machine
Sub-steps:
1. Lift the vehicle using a hydraulic lift.
2. Attach the alignment machine to all four wheels.
3. Adjust the alignment settings as per manufacturer specifications.
4. Tighten all relevant bolts to specified torque values.

5. Inspect Suspension Components

Tools Required: Jack, jack stands, socket set
Sub-steps:
1. Lift the vehicle and secure with jack stands.
2. Visually inspect the suspension components for wear or damage.
3. Replace any worn or damaged parts (e.g., struts, bushings).
4. Lower the vehicle safely after inspection.