why does my Toyota Camry XV40 shake when I brake

Solution

1. Preparation

• Gather the necessary tools and parts.
• Ensure the vehicle is parked on a flat surface and the engine is off.
• Place wheel chocks behind the rear wheels for safety.

2. Raise the Vehicle

• Use a jack to lift the front of the vehicle and secure it with jack stands.
• Remove the front wheels using a socket set.

3. Inspect and Replace Brake Components

• Rotors:
  • Check the thickness and surface for warping.
  • If warped, remove the caliper by removing the caliper mounting bolts.
  • Detach the brake caliper and hang it securely without putting strain on the brake line.
  • Remove the old rotor and install the new rotor, ensuring to torque bolts to manufacturer specifications (typically 70-90 ft-lbs).
• Brake Pads:
  • Remove the old brake pads from the caliper bracket.
  • Clean the caliper bracket and install new brake pads, ensuring they are seated properly.

4. Inspect and Repair Suspension Components

• Visually inspect struts and shocks for leaks or damage.
• Check control arms and bushings for signs of wear or play.
• Replace any worn or damaged suspension components with new parts.

5. Reinstall Wheels and Lower Vehicle

• Reattach the wheels and hand-tighten the lug nuts.
• Lower the vehicle and then torque the lug nuts to specifications (usually 76-100 ft-lbs).
• Test drive the vehicle to ensure the issue is resolved.