why does my Toyota Camry shake when I brake from high speeds

Solution

1. Preparation

• Gather tools and parts required for the repair.
• Ensure the vehicle is parked on a flat surface and the engine is off.
• Disconnect the battery to avoid any electrical issues during the repair.

2. Wheel Removal

1. Loosen the lug nuts slightly while the vehicle is on the ground.
2. Use a jack to lift the vehicle and securely place jack stands under the frame.
3. Remove the lug nuts completely and take off the wheel.

3. Brake Component Inspection

1. Inspect the brake pads for wear; replace if they are below the minimum thickness.
2. Check the brake rotors for warping using a dial indicator; if they exceed manufacturer's specifications, replace them.
3. Clean the rotor surface with brake cleaner to remove any contaminants.

4. Brake Rotor Replacement (if necessary)

1. Remove the caliper by unscrewing the caliper bolts; support it to avoid damaging the brake line.
2. Take off the old rotor by unscrewing any retaining screws (if present) and sliding it off the hub.
3. Install the new rotor and secure it with retaining screws.

5. Reassemble Brakes

1. Reattach the brake caliper and torque the caliper bolts to the manufacturer's specifications.
2. Reinstall the wheel and hand-tighten the lug nuts.
3. Lower the vehicle and then torque the lug nuts to the specified value.