FAULTBASE
Error CodesASKCars
© 2026 FAULTBASE
All rights reserved.
v2.0.0 • Production
ContactPrivacyImpressum
How can I fix the rearview camera malfunction in my 2021 Toyota Camry? - Toyota Camry
Home/Cars/Toyota/Camry/XV70 (2018-2024)/How can I fix the rearview camera malfunction in my 2021 Toyota Camry?

How can I fix the rearview camera malfunction in my 2021 Toyota Camry?

Toyota Camry XV70 (2018-2024)

Error Codes
2-3 hours
Time
medium
Difficulty
medium
Severity
Navigation
ProblemSymptomsDiagnosisSolution
ProblemSymptomsDiagnosisSolution
4 min read
623 words

Problem Statement

Learn how to diagnose and repair the rearview camera malfunction in your 2021 Toyota Camry with step-by-step instructions and required tools.

Affected Component
rearview camera
Estimated Time
2-3 hours

Symptoms

  • •No Display
  • •Intermittent Function
  • •Error Message
  • •Poor Image Quality

Diagnostic Steps

  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
  6. 6

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

  • ✓Test the affected component to ensure it functions correctly
  • ✓Check for any error codes or warning lights
  • ✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

  • •Follow the manufacturer's recommended maintenance schedule
  • •Address warning signs early before they develop into major issues
  • •Use quality parts and fluids recommended for your vehicle
  • •Keep detailed records of all repairs and maintenance

Tools & Equipment Required

  • •OBD-II Scanner
  • •Multimeter
  • •Screwdrivers (Phillips and flathead)
  • •Socket set
  • •Trim removal tools
  • •Cleaning cloth
  • •Electrical contact cleaner
  • •Replacement camera (if necessary)

Additional Information

Affected Component
rearview camera
Estimated Time
2-3 hours
Difficulty
medium
Severity
medium
Tools Required
8 items

Related Faults

Loading...

Share this solution

Comments

Sign in to share your thoughts

Sign In

No comments yet

Be the first to share your thoughts

Back to Generation
Rearview Camera Malfunction in 2021 Toyota Camry (XV70)
Tools Required
  • OBD-II Scanner
  • Multimeter
  • Screwdrivers (Phillips and flathead)
  • Socket set
  • Trim removal tools
  • Cleaning cloth
  • Electrical contact cleaner
  • Replacement camera (if necessary)

Repair Instructions

Step 1: Check the Infotainment System
  • Turn on the vehicle and access the infotainment system. Confirm that it is operational and set to the correct input mode.
Step 2: Inspect the Camera Lens
  • Locate the rearview camera, typically mounted on or near the trunk lid.
  • Clean the lens with a soft cloth to remove any dirt or debris. Test the camera again.
Step 3: Check the Wiring

  1. Access the Camera:

    • Open the trunk and remove any trim panels that may obstruct access to the rearview camera.
    • Use trim removal tools to carefully detach any plastic covers without damaging them.

  2. Inspect Connections:

    • Examine the wiring harness connected to the camera. Ensure all connections are secure and free from corrosion.
    • Use a multimeter to test for continuity in the wires. Repair any broken or frayed wires with solder or electrical tape.
Step 4: Scan for Codes
  • Connect the OBD-II scanner to the vehicle's diagnostic port (usually located under the dashboard).
  • Scan for DTCs related to the rearview camera system. If there are codes, note them for further troubleshooting.
Step 5: Replace the Camera (if necessary)

  1. Disconnect the Battery:

    • Before replacing the camera, disconnect the negative terminal of the battery to prevent electrical shorts.

  2. Remove the Old Camera:

    • Unscrew the mounting screws (typically Torx or Phillips) that secure the camera in place.
    • Carefully disconnect the camera harness.

  3. Install the New Camera:

    • Connect the new camera harness and ensure it fits snugly.
    • Secure the camera with the mounting screws.

  4. Reassemble Trim Panels:

    • Reattach any trim panels removed during the process, ensuring they fit properly.

  5. Reconnect the Battery:

    • Reconnect the negative terminal of the battery.
Step 6: Test the System
  • Start the vehicle and engage the reverse gear. Check if the rearview camera display appears and functions correctly.
  • Confirm that the camera image is clear and that there are no error messages on the dashboard.

Final Notes

  • If the problem persists after these steps, it may require professional diagnosis as there could be a fault within the infotainment system or deeper electrical issues.
  • Always refer to the vehicle’s service manual for specific details and torque specifications for any components replaced.