FAULTBASE
Error CodesASKCars
© 2026 FAULTBASE
All rights reserved.
v2.0.0 • Production
ContactPrivacyImpressum
How can I fix the windshield wipers that are not working on my Toyota Camry XV70? - Toyota Camry
Home/Cars/Toyota/Camry/XV70 (2018-2024)/How can I fix the windshield wipers that are not working on my Toyota Camry XV70?

How can I fix the windshield wipers that are not working on my Toyota Camry XV70?

Toyota Camry XV70 (2018-2024)

Error Codes
2-4 hours
Time
medium
Difficulty
medium
Severity
Navigation
ProblemSymptomsDiagnosisSolution
ProblemSymptomsDiagnosisSolution
4 min read
618 words

Problem Statement

Learn how to diagnose and fix non-functional windshield wipers on your Toyota Camry XV70 (2018-2024) with our step-by-step guide.

Affected Component
windshield wiper system
Estimated Time
2-4 hours

Symptoms

  • •Wipers do not move at all when activated
  • •Wipers move sporadically or at incorrect speeds
  • •Wipers are stuck in a certain position after being turned off
  • •Wiper motor noise or unusual sounds when the switch is engaged

Diagnostic Steps

  1. 1
  2. 2
  3. 3
  4. 4
  5. 5

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

  • ✓Test the affected component to ensure it functions correctly
  • ✓Check for any error codes or warning lights
  • ✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

  • •Follow the manufacturer's recommended maintenance schedule
  • •Address warning signs early before they develop into major issues
  • •Use quality parts and fluids recommended for your vehicle
  • •Keep detailed records of all repairs and maintenance

Tools & Equipment Required

  • •Multimeter
  • •Fuse puller
  • •Screwdrivers (Phillips and flathead)
  • •Socket set
  • •Pliers
  • •Torque wrench
  • •Replacement parts (if needed: wiper motor, linkage, fuses)

Additional Information

Affected Component
windshield wiper system
Estimated Time
2-4 hours
Difficulty
medium
Severity
medium
Tools Required
7 items

Related Faults

Loading...

Share this solution

Comments

Sign in to share your thoughts

Sign In

No comments yet

Be the first to share your thoughts

Back to Generation

Fixing Non-Functional Windshield Wipers on a Toyota Camry XV70 (2018-2024)

Tools Required
  • Multimeter
  • Fuse puller
  • Screwdrivers (Phillips and flathead)
  • Socket set
  • Pliers
  • Torque wrench
  • Replacement parts (if needed: wiper motor, linkage, fuses)
Step-by-Step Repair Instructions
Step 1: Check the Wiper Switch
  1. Turn the Ignition On: Ensure the vehicle is in the "ON" position.
  2. Activate Wipers: Move the wiper switch through all settings (off, intermittent, low, high).
  3. Listen for Sounds: If you hear a clicking sound from the wiper motor, the switch may be functional.
Step 2: Inspect the Fuse
  1. Locate the Fuse Box: Open the driver’s side door and locate the fuse panel (usually under the dashboard).
  2. Identify the Wiper Fuse: Use the diagram on the fuse panel cover to find the wiper fuse.
  3. Remove and Inspect the Fuse: Use a fuse puller or pliers to remove the fuse. Inspect it for continuity (a blown fuse will have a broken filament).
  4. Replace the Fuse: If blown, replace it with a fuse of the same amperage (typically 20A for wipers).
Step 3: Test the Wiper Motor
  1. Access the Wiper Motor: Remove the plastic cover (cowl) at the base of the windshield. This may require unscrewing.
  2. Disconnect the Wiper Motor Connector: Unplug the electrical connector from the wiper motor.
  3. Check Voltage: Use a multimeter to test for voltage at the motor connector while activating the wiper switch.
    • If there is voltage, the motor may be faulty.
    • If there is no voltage, the issue may be upstream (wiring or switch).
Step 4: Examine Wiper Linkage
  1. Inspect the Linkage: After accessing the wiper motor, check the linkage for any signs of wear, damage, or disconnection.
  2. Manually Move Linkage: Ensure the linkage moves freely. If it’s stuck or binding, lubricate or replace as necessary.
Step 5: Look for Electrical Issues
  1. Inspect Wiring: Check for damaged wires or loose connections in the harness leading to the wiper motor.
  2. Repair or Replace: If any issues are found, repair the wiring or replace connectors as necessary.
Step 6: Replace the Wiper Motor (if needed)
  1. Remove the Wiper Motor: Unbolt the motor from its mounting position using a socket set.
  2. Install New Motor: Position the new motor in place and secure it with bolts. Ensure it is correctly aligned.
  3. Reconnect Wiring: Plug the electrical connector back into the new motor.
Step 7: Reassemble and Test
  1. Reinstall the Cowl Cover: Replace any plastic covers or trim removed during the process.
  2. Test the Wipers: Turn on the ignition and test the wipers again in all settings.
  3. Verify Operation: Ensure they operate smoothly without any unusual noises.
Conclusion

If the wipers still do not function after completing these steps, there may be a more complex issue requiring professional diagnosis or the involvement of specialized equipment. If the problem persists, consult a certified mechanic or Toyota dealership for further assistance.