FAULTBASE
Error CodesASKCars
© 2026 FAULTBASE
All rights reserved.
v2.0.0 • Production
ContactPrivacyImpressum
How do I fix the remote start feature not working in my 2020 Toyota Camry? - Toyota Camry
Home/Cars/Toyota/Camry/XV70 (2018-2024)/How do I fix the remote start feature not working in my 2020 Toyota Camry?

How do I fix the remote start feature not working in my 2020 Toyota Camry?

Toyota Camry XV70 (2018-2024)

Error Codes
2-4 hours
Time
medium
Difficulty
medium
Severity
Navigation
ProblemSymptomsDiagnosisSolution
ProblemSymptomsDiagnosisSolution
3 min read
590 words

Problem Statement

Learn how to diagnose and repair the remote start feature in your 2020 Toyota Camry with step-by-step instructions.

Affected Component
Remote Start System
Estimated Time
2-4 hours

Symptoms

  • •Remote Start Button Not Responding
  • •Engine Does Not Start
  • •Warning Lights
  • •No Indicator Sounds

Diagnostic Steps

  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
  6. 6

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

  • ✓Test the affected component to ensure it functions correctly
  • ✓Check for any error codes or warning lights
  • ✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

  • •Follow the manufacturer's recommended maintenance schedule
  • •Address warning signs early before they develop into major issues
  • •Use quality parts and fluids recommended for your vehicle
  • •Keep detailed records of all repairs and maintenance

Tools & Equipment Required

  • •Small flathead screwdriver
  • •Replacement battery (CR2032)
  • •Vehicle owner's manual
  • •Multimeter
  • •OBD-II scanner

Additional Information

Affected Component
Remote Start System
Estimated Time
2-4 hours
Difficulty
medium
Severity
medium
Tools Required
5 items

Related Faults

Loading...

Share this solution

Comments

Sign in to share your thoughts

Sign In

No comments yet

Be the first to share your thoughts

Back to Generation

Fixing the Remote Start Feature in a 2020 Toyota Camry (XV70)

Repair Instructions

  1. Replace Key Fob Battery:

    • Open the key fob using the flathead screwdriver.
    • Remove the old battery and insert a new CR2032 battery.
    • Reassemble the key fob and test the remote start function.

  2. Enable Remote Start Feature:

    • Access the settings in the infotainment system.
    • Navigate to 'Vehicle Settings' > 'Remote Start' and ensure it is enabled.

  3. Repair/Replace Hood Latch Switch:

    • Inspect the hood latch for any visible damage or wear.
    • If the switch is defective, disconnect the wiring harness and replace the switch with a new one.
    • Test the remote start function after replacing.

  4. Replace Brake Pedal Switch:

    • Disconnect the negative battery terminal.
    • Locate the brake pedal switch (typically found above the brake pedal).
    • Disconnect the wiring harness and remove the switch.
    • Install a new brake pedal switch and reconnect the wiring.
    • Reconnect the battery terminal and test the remote start feature.

  5. Clear DTCs and Reset the System:

    • After addressing any issues found via the OBD-II, clear the trouble codes using the scanner.
    • Turn the vehicle off and then back on to reset the system.
    • Test the remote start feature again.
Conclusion

If after following these steps the remote start feature still does not function, it may require professional diagnostics. There could be deeper electrical issues or potential faults within the vehicle's computer systems that need specialized tools and expertise to diagnose and repair.