How do I reset the tire pressure monitoring system in my 2018 Toyota Camry?

Toyota Camry XV70 (2018-2024)

Error Codes

15 minutes

Time

easy

Difficulty

low

Severity

4 min read

630 words

Problem Statement

Learn how to reset the Tire Pressure Monitoring System (TPMS) in your 2018 Toyota Camry with this easy step-by-step guide.

Affected Component

Tire Pressure Monitoring System (TPMS)

Estimated Time

15 minutes

Symptoms

•TPMS warning light illuminated on the dashboard.
•Low tire pressure alert on the multi-information display.
•Tire pressure has been adjusted, but the warning light remains on.

Diagnostic Steps

1
Check Tire Pressure
2
Inspect for Damage
3
Check TPMS Sensors

Solution

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•Tire Pressure Gauge
•TPMS Reset Tool (optional for advanced diagnostics, but not required)
•Owner’s Manual (for reference)

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Resetting the Tire Pressure Monitoring System (TPMS) in a 2018 Toyota Camry

The Tire Pressure Monitoring System (TPMS) in your 2018 Toyota Camry is designed to alert you when your tire pressure is low. After correcting any low tire pressures, you may need to reset the TPMS to clear the warning light from the dashboard. Below are the symptoms, diagnostic steps, tools required, and the step-by-step instructions on how to reset the TPMS.

Tools Required

Tire Pressure Gauge
TPMS Reset Tool (optional for advanced diagnostics, but not required)
Owner’s Manual (for reference)

Step-by-Step Instructions to Reset the TPMS

Step 1: Adjust Tire Pressure

Ensure Proper Inflation:
- Inflate all tires, including the spare, to the recommended pressure (found on the driver’s side door jamb).
- After inflating, allow a few minutes for the system to register the changes.

Step 2: Turn On the Ignition

Ignition Position:
- Insert the key into the ignition and turn it to the “ON” position, but do not start the engine. Alternatively, press the "Start" button twice without pressing the brake pedal if your Camry is equipped with a push-button start.

Step 3: Locate the TPMS Reset Button

Find the Reset Button:
- The TPMS reset button is typically located beneath the steering wheel, near the lower dashboard area. You may need to feel around or use a flashlight to locate it.

Step 4: Reset the TPMS

Press and Hold the Reset Button:
- Press and hold the TPMS reset button until the TPMS warning light blinks three times, then release the button.

Step 5: Turn Off the Ignition

Turn Off the Ignition:
- Turn the ignition off completely.

Step 6: Start the Engine

Start the Engine:
- Start the vehicle. The TPMS warning light should turn off after a few minutes of driving, indicating that the system has been reset successfully.

Step 7: Additional Steps if Light Remains On

Drive the Vehicle:
- Drive the vehicle for about 10-15 minutes at speeds over 25 mph. This allows the TPMS to recalibrate and recognize the correct tire pressures.
Recheck the Tire Pressure:
- If the TPMS warning light remains on after driving, recheck the tire pressures again and inspect for any faults in the TPMS sensors.

Step 8: Consult a Professional

If Problems Persist:
- If the warning light does not turn off after following these steps, it may be necessary to consult a professional mechanic or visit a Toyota dealership for further diagnosis of the TPMS system.

Conclusion

Resetting the TPMS in your 2018 Toyota Camry is a straightforward process that can usually be completed in just a few minutes. By ensuring that your tires are inflated to the correct pressure and following the reset steps, you can maintain the functionality of your vehicle's tire monitoring system. If issues persist, seeking professional assistance is recommended.