how to reset the maintenance light on my Toyota Camry XV70 (2018-2024)

Toyota Camry XV70 (2018-2024)

Error Codes

5-10 minutes

Time

easy

Difficulty

low

Severity

3 min read

449 words

Problem Statement

Learn how to reset the maintenance light on your Toyota Camry XV70 (2018-2024) with this simple step-by-step guide. Ensure accurate service reminders.

Affected Component

Electrical

Estimated Time

5-10 minutes

⚠️ Safety Warnings

Important safety information - read before proceeding

•Ensure the vehicle is in a safe, stationary position before performing the reset.

Symptoms

•Maintenance light is illuminated on the dashboard
•Potentially inaccurate service reminders
•Vehicle may not indicate when maintenance is actually due

Diagnostic Steps

1
Turn the ignition key to the 'ON' position without starting the engine.
2
Ensure that the odometer display is set to show the total mileage (not trip or average).
3
Turn off the ignition.
4
Press and hold the 'Trip' button on the instrument panel.
5
While holding the 'Trip' button, turn the ignition back to the 'ON' position.
6
Continue holding the 'Trip' button until the maintenance light flashes and then goes out.

Solution

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•None required for this procedure.

Parts Required

•None required for this procedure.

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Turn the ignition key to the 'ON' position without starting the engine.
2
Ensure that the odometer display is set to show the total mileage (not trip or average).
3
Turn off the ignition.
4
Press and hold the 'Trip' button on the instrument panel.
5
While holding the 'Trip' button, turn the ignition back to the 'ON' position.
6
Continue holding the 'Trip' button until the maintenance light flashes and then goes out.

Solution

1. Preparation

Gather necessary tools:
- None required for this procedure, but ensure the vehicle is in a safe location.
Ensure the vehicle is in "Park" and the ignition is off.

2. Resetting the Maintenance Light

Turn Ignition On:
- Insert the key and turn it to the "ON" position without starting the engine.
Set Odometer to Total Mileage:
- Check the odometer display to confirm it is showing the total mileage. If it shows the trip mileage, press the "Trip" button to switch to total mileage.
Turn Off Ignition:
- Turn the ignition off completely.
Hold the Trip Button:
- Press and hold down the "Trip" button on the instrument panel.
Turn Ignition Back On:
- While continuing to hold the "Trip" button, turn the ignition back to the "ON" position.
Wait for the Light to Reset:
- Keep holding the "Trip" button until the maintenance light starts flashing and then turns off. This indicates the reset is complete.

3. Finalize the Process

Release the "Trip" button after the light has turned off.
Turn off the ignition and then start the vehicle to ensure the maintenance light remains off.