how to reset the maintenance light on Toyota Camry XV70 (2018-2024)

Toyota Camry XV70 (2018-2024)

Error Codes

5-10 minutes

Time

easy

Difficulty

low

Severity

2 min read

376 words

Problem Statement

Learn how to reset the maintenance light on your Toyota Camry XV70 (2018-2024) with this easy step-by-step guide. No tools required.

Affected Component

Electrical

Estimated Time

5-10 minutes

⚠️ Safety Warnings

Important safety information - read before proceeding

•Ensure the vehicle is in park and on a level surface before performing the reset.

Symptoms

•Maintenance light illuminated on the dashboard
•Reminder notification displayed on the multi-information display
•No change in vehicle performance or issues

Diagnostic Steps

1
Ensure the vehicle is in the 'ON' position, but the engine is not running.
2
Locate the odometer display on the instrument cluster.
3
Check if the trip meter is set to 'Trip A'; if not, reset it by pressing the trip meter button.
4
Turn off the ignition.
5
Press and hold the trip meter button while turning the ignition back to the 'ON' position without starting the engine.
6
Continue holding the trip meter button until the maintenance light resets and the odometer displays '000000.'

Solution

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•None

Parts Required

•None

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Ensure the vehicle is in the 'ON' position, but the engine is not running.
2
Locate the odometer display on the instrument cluster.
3
Check if the trip meter is set to 'Trip A'; if not, reset it by pressing the trip meter button.
4
Turn off the ignition.
5
Press and hold the trip meter button while turning the ignition back to the 'ON' position without starting the engine.
6
Continue holding the trip meter button until the maintenance light resets and the odometer displays '000000.'

Solution

1. Preparation

Gather necessary tools: None required for this process.
Ensure the vehicle is parked on a level surface with the engine off.

2. Set Trip Meter

Press the trip meter button located on the instrument cluster until you see "Trip A" displayed.

3. Power Off

Turn the ignition key to the "OFF" position completely.

4. Reset Maintenance Light

Press and hold the trip meter button.
While holding the button, turn the ignition key to the "ON" position (do not start the engine).
Continue holding the trip meter button until the maintenance light turns off, and the odometer reads "000000."

5. Finalize

Release the trip meter button.
Turn the ignition back to the "OFF" position.
Start the engine to confirm the maintenance light is off.