FAULTBASE
Error CodesASKCars
© 2026 FAULTBASE
All rights reserved.
v2.0.0 • Production
ContactPrivacyImpressum
how to reset the maintenance light on Toyota Camry XV70 (2018-2024) - Toyota Camry
Home/Cars/Toyota/Camry/XV70 (2018-2024)/how to reset the maintenance light on Toyota Camry XV70 (2018-2024)

how to reset the maintenance light on Toyota Camry XV70 (2018-2024)

Toyota Camry XV70 (2018-2024)

Error Codes
5-10 minutes
Time
easy
Difficulty
low
Severity
Navigation
ProblemSymptomsDiagnosisSolution
ProblemSymptomsDiagnosisSolution
2 min read
382 words

Problem Statement

Learn how to reset the maintenance light on your 2018-2024 Toyota Camry XV70. Follow our step-by-step guide for a quick and easy reset process.

Affected Component
Electrical
Estimated Time
5-10 minutes

⚠️ Safety Warnings

Important safety information - read before proceeding

  • •Ensure the vehicle is in 'Park' or neutral with the parking brake engaged before attempting the reset.

Symptoms

  • •Maintenance light illuminated on the dashboard
  • •No other warning lights present
  • •Vehicle has recently undergone an oil change or maintenance service

Diagnostic Steps

  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
  6. 6

Solution

Verification

After completing the repair, verify that the issue has been resolved:

  • ✓Test the affected component to ensure it functions correctly
  • ✓Check for any error codes or warning lights
  • ✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

  • •Follow the manufacturer's recommended maintenance schedule
  • •Address warning signs early before they develop into major issues
  • •Use quality parts and fluids recommended for your vehicle
  • •Keep detailed records of all repairs and maintenance

Tools & Equipment Required

  • •None required for the reset procedure.

Parts Required

  • •None required for the reset procedure.

Additional Information

Affected Component
Electrical
Estimated Time
5-10 minutes
Difficulty
easy
Severity
low
Tools Required
1 item
Parts Required
1 item

Related Faults

Loading...

Share this solution

Comments

Sign in to share your thoughts

Sign In

No comments yet

Be the first to share your thoughts

Back to Generation
Solution
1. Preparation
  • Gather necessary tools: None required for the reset process.
  • Ensure the vehicle is in a safe and stationary position.
2. Reset Maintenance Light

  1. Turn Ignition On

    • Insert the key and turn to the "ON" position without starting the engine.

  2. Check Odometer Display

    • Confirm that the odometer is visible; it should not be in trip mode.

  3. Power Off

    • Turn the ignition completely off.

  4. Press Trip Meter Reset Button

    • Press and hold the trip meter reset button located on the dashboard.

  5. Turn Ignition On Again

    • While holding the trip meter reset button, turn the ignition back to the "ON" position.

  6. Hold Until Reset Confirmation

    • Continue to hold the trip meter reset button until the maintenance light blinks and then turns off, indicating the reset is successful.