FAULTBASE
Error CodesASKCars
© 2026 FAULTBASE
All rights reserved.
v2.0.0 • Production
ContactPrivacyImpressum
how to reset the maintenance light on Toyota Camry XV70 (2018-2024) - Toyota Camry
Home/Cars/Toyota/Camry/XV70 (2018-2024)/how to reset the maintenance light on Toyota Camry XV70 (2018-2024)

how to reset the maintenance light on Toyota Camry XV70 (2018-2024)

Toyota Camry XV70 (2018-2024)

Error Codes
5-10 minutes
Time
easy
Difficulty
low
Severity
Navigation
ProblemSymptomsDiagnosisSolution
ProblemSymptomsDiagnosisSolution
2 min read
347 words

Problem Statement

Learn how to reset the maintenance light on a 2018-2024 Toyota Camry XV70 after routine maintenance. Step-by-step guide included.

Affected Component
Electrical
Estimated Time
5-10 minutes

⚠️ Safety Warnings

Important safety information - read before proceeding

  • •Ensure the vehicle is in a safe, stationary position before performing the reset.

Symptoms

  • •Maintenance light illuminated on the dashboard
  • •Odometer displays maintenance reminder message
  • •Engine oil change performed

Diagnostic Steps

  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
  6. 6

Solution

Verification

After completing the repair, verify that the issue has been resolved:

  • ✓Test the affected component to ensure it functions correctly
  • ✓Check for any error codes or warning lights
  • ✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

  • •Follow the manufacturer's recommended maintenance schedule
  • •Address warning signs early before they develop into major issues
  • •Use quality parts and fluids recommended for your vehicle
  • •Keep detailed records of all repairs and maintenance

Tools & Equipment Required

  • •None

Parts Required

  • •None

Additional Information

Affected Component
Electrical
Estimated Time
5-10 minutes
Difficulty
easy
Severity
low
Tools Required
1 item
Parts Required
1 item

Related Faults

Loading...

Share this solution

Comments

Sign in to share your thoughts

Sign In

No comments yet

Be the first to share your thoughts

Back to Generation
Solution
1. Preparation
  • Gather necessary tools: None required.
  • Ensure the vehicle is parked in a safe location with the ignition off.
2. Resetting the Maintenance Light
  1. Turn Ignition On
    • Turn the ignition switch to the "ON" position without starting the engine.
  2. Set Odometer Display
    • Check that the odometer is showing the total mileage reading.
  3. Turn Ignition Off
    • Turn the ignition back to the "OFF" position.
  4. Press Odometer Reset Button
    • Locate the odometer reset button on the instrument cluster and press and hold it.
  5. Turn Ignition On Again
    • While holding the odometer reset button, turn the ignition switch back to the "ON" position.
  6. Hold Until Reset
    • Keep holding the odometer reset button until the maintenance light blinks and then turns off, indicating a successful reset.