FAULTBASE
Error CodesASKCars
© 2026 FAULTBASE
All rights reserved.
v2.0.0 • Production
ContactPrivacyImpressum
how to reset the service light on Toyota Camry XV50 (2012-2017) - Toyota Camry
Home/Cars/Toyota/Camry/XV70 (2018-2024)/how to reset the service light on Toyota Camry XV50 (2012-2017)

how to reset the service light on Toyota Camry XV50 (2012-2017)

Toyota Camry XV70 (2018-2024)

Error Codes
5-10 minutes
Time
easy
Difficulty
low
Severity
Navigation
ProblemSymptomsDiagnosisSolution
ProblemSymptomsDiagnosisSolution
2 min read
346 words

Problem Statement

Learn how to reset the service light on a 2012-2017 Toyota Camry XV50. Step-by-step guide to clear maintenance reminders after service.

Affected Component
Electrical
Estimated Time
5-10 minutes

⚠️ Safety Warnings

Important safety information - read before proceeding

  • •Ensure the vehicle is parked safely and on a flat surface during the reset procedure.

Symptoms

  • •Service light remains illuminated on the dashboard
  • •Reminder notification for scheduled maintenance appears
  • •Engine oil change or filter replacement completed

Diagnostic Steps

  1. 1
  2. 2
  3. 3

Solution

Verification

After completing the repair, verify that the issue has been resolved:

  • ✓Test the affected component to ensure it functions correctly
  • ✓Check for any error codes or warning lights
  • ✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

  • •Follow the manufacturer's recommended maintenance schedule
  • •Address warning signs early before they develop into major issues
  • •Use quality parts and fluids recommended for your vehicle
  • •Keep detailed records of all repairs and maintenance

Tools & Equipment Required

  • •None required for this procedure.

Parts Required

  • •None required for this procedure.

Additional Information

Affected Component
Electrical
Estimated Time
5-10 minutes
Difficulty
easy
Severity
low
Tools Required
1 item
Parts Required
1 item

Related Faults

Loading...

Share this solution

Comments

Sign in to share your thoughts

Sign In

No comments yet

Be the first to share your thoughts

Back to Generation
Solution
1. Preparation
  • Gather necessary tools: none required for this procedure.
  • Ensure all doors are closed and the vehicle is in the "ON" position.
2. Reset Procedure
  1. Press and Hold the Gas Pedal

    • Press the gas pedal all the way down and hold it.
  2. Press and Hold the Brake Pedal

    • While holding the gas pedal, press the brake pedal down and hold it as well.
  3. Wait for the Service Light to Blink

    • Keep both pedals pressed for about 10 seconds until the service light begins to blink.
  4. Release Both Pedals

    • Release both the gas and brake pedals simultaneously.
  5. Turn Off the Ignition

    • Turn the ignition switch to the "OFF" position and wait for a few seconds.
  6. Start the Engine

    • Start the engine to verify that the service light has been reset.