FAULTBASE
Error CodesASKCars
© 2026 FAULTBASE
All rights reserved.
v2.0.0 • Production
ContactPrivacyImpressum
my Toyota Camry XV50 (2012-2017) shudders when accelerating, what does this mean? - Toyota Camry
Home/Cars/Toyota/Camry/XV70 (2018-2024)/my Toyota Camry XV50 (2012-2017) shudders when accelerating, what does this mean?

my Toyota Camry XV50 (2012-2017) shudders when accelerating, what does this mean?

Toyota Camry XV70 (2018-2024)

Error Codes
2-4 hours
Time
medium
Difficulty
medium
Severity
Navigation
ProblemSymptomsDiagnosisSolution
ProblemSymptomsDiagnosisSolution
3 min read
539 words

Problem Statement

Learn how to diagnose and fix shuddering during acceleration in Toyota Camry XV50 (2012-2017). Step-by-step guide with diagnostic procedures and repair instructions.

Affected Component
Engine
Estimated Time
2-4 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

  • •Disconnect the battery before working on electrical systems.
  • •Allow the engine to cool before performing any maintenance.

Symptoms

  • •Shuddering or shaking felt through the steering wheel or seat during acceleration
  • •Decrease in acceleration power
  • •Possible engine vibration or noise
  • •Check engine light may illuminate
  • •Poor fuel economy

Diagnostic Steps

  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
  6. 6

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

  • ✓Test the affected component to ensure it functions correctly
  • ✓Check for any error codes or warning lights
  • ✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

  • •Follow the manufacturer's recommended maintenance schedule
  • •Address warning signs early before they develop into major issues
  • •Use quality parts and fluids recommended for your vehicle
  • •Keep detailed records of all repairs and maintenance

Tools & Equipment Required

  • •OBD-II scanner
  • •Socket set
  • •Torque wrench
  • •Ratchet
  • •Spark plug socket
  • •Jack and jack stands

Parts Required

  • •Spark plugs
  • •Ignition coils (if needed)
  • •Engine/transmission mounts (if needed)
  • •Transmission fluid

Additional Information

Affected Component
Engine
Estimated Time
2-4 hours
Difficulty
medium
Severity
medium
Tools Required
6 items
Parts Required
4 items

Related Faults

Loading...

Share this solution

Comments

Sign in to share your thoughts

Sign In

No comments yet

Be the first to share your thoughts

Back to Generation
Solution
1. Preparation
  • Ensure the vehicle is parked on a level surface and the ignition is off.
  • Gather necessary tools and parts.
2. Replace Spark Plugs and Ignition Coils (if needed)
  • Tools Required: Socket set, torque wrench, ratchet, spark plug socket, dielectric grease.
  • Remove the engine cover if applicable.
  • Disconnect the ignition coil connectors and remove the coils using the socket set.
  • Unscrew the old spark plugs using the spark plug socket, and inspect for wear or damage.
  • Install new spark plugs to the manufacturer's specified torque (usually around 13-15 ft-lbs).
  • Apply dielectric grease to the connectors and reinstall ignition coils.
3. Inspect and Replace Engine/Transmission Mounts (if needed)
  • Tools Required: Jack and jack stands, socket set.
  • Safely lift the vehicle and place jack stands under the frame.
  • Identify and visually inspect the engine and transmission mounts for cracks or deterioration.
  • If damaged, unbolt the mounts using the socket set and replace with new mounts.
  • Reinstall the mounts and torque to manufacturer specifications.
4. Check Transmission Fluid
  • Tools Required: Transmission fluid dipstick or funnel.
  • Locate the transmission fluid dipstick and check the fluid level and condition.
  • If low, add the appropriate type of transmission fluid as specified in the owner’s manual.
  • If the fluid is dark or has a burnt smell, perform a transmission fluid change.