my Toyota Camry XV70 (2018-2024) shakes when braking, what's wrong?

Toyota Camry XV70 (2018-2024)

Error Codes

2-4 hours

Time

medium

Difficulty

high

Severity

3 min read

491 words

⚠️ Safety Warning

This issue requires immediate attention. If you are not experienced with automotive repairs, consult a professional mechanic. Working on critical systems can be dangerous.

Problem Statement

Learn how to diagnose and fix shaking during braking in Toyota Camry XV70 (2018-2024). Step-by-step guide with diagnostic procedures and repair instructions.

Affected Component

Brakes

Estimated Time

2-4 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

•Always allow the brakes to cool before working on them.
•Ensure the vehicle is securely lifted and supported on jack stands before working underneath.

Symptoms

•Vibration felt in the steering wheel during braking
•Shaking in the vehicle chassis when applying the brakes
•Uneven brake pedal feel
•Potential noise from the brakes (squeaking or grinding)
•Increased stopping distance

Diagnostic Steps

1
Inspect brake pads for wear and uneven thickness.
2
Check brake rotors for warping or thickness variation using a dial indicator.
3
Examine the brake calipers for proper operation and signs of sticking.
4
Inspect suspension components (e.g., control arms, bushings) for wear or damage.
5
Verify wheel alignment and balance.

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•Socket set
•Jack
•Jack stands
•Torque wrench
•Brake cleaner
•Caliper tool
•OBD-II scanner

Parts Required

•Brake pads
•Brake rotors (if warped)
•Brake calipers (if needed)

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Inspect brake pads for wear and uneven thickness.
2
Check brake rotors for warping or thickness variation using a dial indicator.
3
Examine the brake calipers for proper operation and signs of sticking.
4
Inspect suspension components (e.g., control arms, bushings) for wear or damage.
5
Verify wheel alignment and balance.

Solution

1. Preparation

Gather necessary tools and parts.
Ensure the vehicle is parked on a level surface with the parking brake engaged.
Disconnect the battery for safety.

2. Remove Wheel

Tools Required: Socket set, jack, jack stands.
Sub-steps:
1. Loosen lug nuts slightly while the wheel is still on the ground.
2. Jack up the vehicle and secure it with jack stands.
3. Remove the lug nuts and take off the wheel.

3. Inspect and Replace Brake Components

Tools Required: Torque wrench, brake cleaner, caliper tool.
Sub-steps:
1. Inspect brake pads for uneven wear; replace if necessary.
  - Note: Minimum thickness should be 3mm; if less, replace.
2. Check rotors for warping:
  - If warped, replace rotors or have them resurfaced.
  - Ensure rotor thickness meets manufacturer specifications.
3. Inspect calipers for proper movement; replace if they are sticking.
4. Clean brake components with brake cleaner before reassembly.

4. Reassemble Components

Sub-steps:
1. Reinstall the brake components and ensure all bolts are torqued to manufacturer specifications.
2. Reattach the wheel and hand-tighten the lug nuts.
3. Lower the vehicle and fully torque the lug nuts to the specified value.

5. Final Checks

Tools Required: OBD-II scanner (optional for checking brake system codes).
Sub-steps:
1. Reconnect the battery.
2. Conduct a test drive to check for vibrations and ensure proper brake function.