FAULTBASE
Error CodesASKCars
© 2026 FAULTBASE
All rights reserved.
v2.0.0 • Production
ContactPrivacyImpressum
What are the signs of a failing ignition coil in a 2018 Toyota Camry? - Toyota Camry
Home/Cars/Toyota/Camry/XV70 (2018-2024)/What are the signs of a failing ignition coil in a 2018 Toyota Camry?

What are the signs of a failing ignition coil in a 2018 Toyota Camry?

Toyota Camry XV70 (2018-2024)

Error Codes
1-2 hours
Time
medium
Difficulty
medium
Severity
Navigation
ProblemSymptomsDiagnosisSolution
ProblemSymptomsDiagnosisSolution
4 min read
738 words

Problem Statement

Learn about the symptoms, diagnostic steps, and repair instructions for a failing ignition coil in a 2018 Toyota Camry.

Affected Component
ignition coil
Estimated Time
1-2 hours

Symptoms

  • •Engine Misfires
  • •Check Engine Light
  • •Poor Fuel Economy
  • •Rough Idle
  • •Difficulty Starting
  • •Increased Emissions

Diagnostic Steps

  1. 1
  2. 2
  3. 3
  4. 4
  5. 5

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

  • ✓Test the affected component to ensure it functions correctly
  • ✓Check for any error codes or warning lights
  • ✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

  • •Follow the manufacturer's recommended maintenance schedule
  • •Address warning signs early before they develop into major issues
  • •Use quality parts and fluids recommended for your vehicle
  • •Keep detailed records of all repairs and maintenance

Tools & Equipment Required

  • •Flashlight
  • •Basic hand tools
  • •OBD-II Scanner
  • •Socket set
  • •Torque wrench
  • •Multimeter
  • •Oscilloscope (optional)
  • •Ratchet
  • •Dielectric grease (optional)

Additional Information

Affected Component
ignition coil
Estimated Time
1-2 hours
Difficulty
medium
Severity
medium
Tools Required
9 items

Related Faults

Loading...

Share this solution

Comments

Sign in to share your thoughts

Sign In

No comments yet

Be the first to share your thoughts

Back to Generation

Signs of a Failing Ignition Coil in a 2018 Toyota Camry (XV70)

A failing ignition coil can lead to various performance issues in your 2018 Toyota Camry. Below are the symptoms, diagnostic steps, tools required, and repair instructions to address ignition coil problems.

Step 1: Visual Inspection
  • Tools Required: Flashlight, basic hand tools.
  • Instructions:
    • Open the hood and locate the ignition coils. They are typically mounted on top of the engine, directly above the spark plugs.
    • Check for any physical damage to the coils, such as cracks or corrosion.
    • Inspect the wiring harness connected to the coils for any frays or loose connections.
Step 2: Check Engine Light Code
  • Tools Required: OBD-II Scanner.
  • Instructions:
    • Connect an OBD-II scanner to the vehicle’s diagnostic port (usually located under the dashboard).
    • Turn the ignition to the "ON" position without starting the engine.
    • Retrieve any stored trouble codes. Look specifically for codes related to misfires (P0300-P0304) or ignition coil failures.
Step 3: Spark Plug Inspection
  • Tools Required: Socket set, torque wrench.
  • Instructions:
    • Remove the ignition coil(s) to access the spark plugs.
    • Inspect the spark plugs for wear, carbon buildup, or damage. Replace if necessary.
    • If the spark plugs are in good condition, reinstall them.
Step 4: Coil Resistance Test
  • Tools Required: Multimeter.
  • Instructions:
    • Disconnect the electrical connector from the ignition coil.
    • Using a multimeter, set it to measure resistance (ohms).
    • Measure the resistance between the primary terminals of the coil (the two terminals that connect to the vehicle's electrical system). Typical values are usually around 0.4 to 2 ohms; refer to the service manual for specific values.
    • Measure the secondary resistance by connecting the multimeter leads to the high-voltage terminal and one of the primary terminals. This value should be in the range of 6,000 to 15,000 ohms.
Step 5: Inductive Kick Test (Optional)
  • Tools Required: Oscilloscope (optional but recommended for advanced diagnostics).
  • Instructions:
    • Connect the oscilloscope to monitor the ignition coil waveform during engine cranking. This can help identify a failing coil based on waveform irregularities.
Repair Instructions
Replacing the Ignition Coil

Tools Required:

  • Socket set
  • Torque wrench
  • Ratchet
  • Dielectric grease (optional)

Instructions:

  1. Preparation:

    • Ensure the vehicle is parked on a level surface and the ignition is off. Disconnect the negative battery terminal to prevent electrical shock.

  2. Remove the Ignition Coil:

    • Locate the faulty ignition coil based on the diagnostic steps.
    • Remove the bolt(s) securing the ignition coil to the engine using the socket set.
    • Gently pull the ignition coil straight up to disconnect it from the spark plug. Be careful not to damage surrounding components.

  3. Install the New Ignition Coil:

    • Before installing the new ignition coil, apply a small amount of dielectric grease to the inside of the connector to prevent moisture intrusion.
    • Align the new ignition coil with the spark plug and push it down firmly until it clicks into place.
    • Reinstall the bolt(s) and tighten them to the manufacturer’s specified torque.

  4. Reconnect the Battery:

    • Reconnect the negative battery terminal.

  5. Test the Vehicle:

    • Start the engine and observe for any signs of misfire or the check engine light.
    • Allow the engine to reach operating temperature and test drive to ensure proper functionality.
Conclusion

If symptoms persist after replacing the ignition coil, further diagnostics may be needed, potentially involving the fuel system, engine timing, or other ignition components. Always consult your vehicle’s service manual for specific torque specifications and procedures.