FAULTBASE
Error CodesASKCars
© 2026 FAULTBASE
All rights reserved.
v2.0.0 • Production
ContactPrivacyImpressum
What common problems arise with the Toyota Camry XV70's adaptive cruise control? - Toyota Camry
Home/Cars/Toyota/Camry/XV70 (2018-2024)/What common problems arise with the Toyota Camry XV70's adaptive cruise control?

What common problems arise with the Toyota Camry XV70's adaptive cruise control?

Toyota Camry XV70 (2018-2024)

Error Codes
2-4 hours
Time
medium
Difficulty
medium
Severity
Navigation
ProblemSymptomsDiagnosisSolution
ProblemSymptomsDiagnosisSolution
4 min read
648 words

Problem Statement

Explore common issues with the adaptive cruise control system in the Toyota Camry XV70, including symptoms, diagnostic steps, and repair instructions.

Affected Component
adaptive cruise control system
Estimated Time
2-4 hours

Symptoms

  • •Vehicle does not maintain set speed; it accelerates or decelerates unexpectedly.
  • •The car brakes suddenly without a clear reason, often when no other vehicle is present.
  • •Warning light appears on the dashboard, indicating a system fault.
  • •The system fails to activate when the cruise control button is pressed.
  • •A message or light indicating that the radar or camera system is obstructed.

Diagnostic Steps

  1. 1
  2. 2
  3. 3
  4. 4
  5. 5

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

  • ✓Test the affected component to ensure it functions correctly
  • ✓Check for any error codes or warning lights
  • ✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

  • •Follow the manufacturer's recommended maintenance schedule
  • •Address warning signs early before they develop into major issues
  • •Use quality parts and fluids recommended for your vehicle
  • •Keep detailed records of all repairs and maintenance

Tools & Equipment Required

  • •OBD-II Scanner
  • •Flathead screwdriver
  • •Cleaning cloth
  • •Multimeter
  • •Vehicle owner's manual
  • •Torque wrench
  • •Replacement sensor
  • •Socket set
  • •Wiring harness
  • •Electrical tape
  • •Soldering iron

Additional Information

Affected Component
adaptive cruise control system
Estimated Time
2-4 hours
Difficulty
medium
Severity
medium
Tools Required
11 items

Related Faults

Loading...

Share this solution

Comments

Sign in to share your thoughts

Sign In

No comments yet

Be the first to share your thoughts

Back to Generation

Common Problems with the Toyota Camry XV70's Adaptive Cruise Control

The Toyota Camry XV70, produced from 2018 to 2024, features a sophisticated adaptive cruise control (ACC) system that can sometimes encounter issues. Below are common problems, symptoms, diagnostic steps, tools required, and repair instructions.

Common Problems
  1. Inconsistent Speed Control
  2. False Activation of Braking
  3. Malfunction Indicator Light (MIL)
  4. ACC Not Engaging
  5. Sensor Obstruction
Step 1: Check for Diagnostic Trouble Codes (DTCs)
  1. Tools Required: OBD-II Scanner
  2. Procedure:
    • Connect the OBD-II scanner to the vehicle's diagnostic port (usually located under the dashboard).
    • Turn on the ignition without starting the engine.
    • Read any stored DTCs related to the ACC system.
    • Take note of any codes for further diagnosis.
Step 2: Inspect the Sensors
  1. Tools Required: Flathead screwdriver, cleaning cloth, possibly a multimeter.
  2. Procedure:
    • Locate the ACC sensors (usually in the grille or windshield).
    • Check for physical obstructions (dirt, snow, or ice) on the sensors.
    • Clean the sensors with a soft cloth if necessary.
    • If the sensor appears damaged, further inspection or replacement may be required.
Step 3: Verify System Settings
  1. Tools Required: Vehicle owner's manual.
  2. Procedure:
    • Refer to the owner's manual for specific ACC settings.
    • Ensure all settings are properly configured (e.g., distance settings, speed limits).
    • Reset the system by turning the vehicle off and on.
Step 4: Check Electrical Connections
  1. Tools Required: Multimeter, torque wrench (if needed).
  2. Procedure:
    • Inspect the wiring harness connected to the ACC module and sensors.
    • Use a multimeter to check for continuity and voltage at the connectors.
    • Tighten any loose connections and repair or replace any damaged wiring.
Step 5: Test Drive
  1. Tools Required: None.
  2. Procedure:
    • After performing the previous checks, take the vehicle for a test drive.
    • Activate the ACC and observe its performance.
    • Monitor for any warning lights or irregular behavior.
Repair Instructions
Repairing a Faulty Sensor
  1. Tools Required: Replacement sensor, socket set, torque wrench.
  2. Procedure:
    • Disconnect the battery to ensure safety.
    • Remove the grille or cover if the sensor is located there.
    • Unplug the faulty sensor from its wiring harness.
    • Install the new sensor by reversing the removal steps.
    • Reconnect the battery and clear any DTCs with the OBD-II scanner.
    • Perform a test drive to ensure proper functionality.
Replacing Wiring Harness
  1. Tools Required: Wiring harness, electrical tape, soldering iron (if needed).
  2. Procedure:
    • Disconnect the battery.
    • Carefully remove the damaged wiring harness from the vehicle.
    • Install the new wiring harness, ensuring all connectors are secure.
    • Use electrical tape or heat-shrink tubing to protect any soldered joints.
    • Reconnect the battery and test the ACC system.
Resetting the ACC System
  1. Tools Required: OBD-II scanner.
  2. Procedure:
    • After any repair, use the OBD-II scanner to clear any fault codes.
    • Turn off the vehicle for at least 10 seconds.
    • Start the vehicle and test the ACC again.
Conclusion

By following these diagnostic steps and repair instructions, you can effectively troubleshoot and resolve common issues with the adaptive cruise control system in the Toyota Camry XV70. Always refer to the vehicle's service manual for specific specifications and detailed diagrams.