FAULTBASE
Error CodesASKCars
© 2026 FAULTBASE
All rights reserved.
v2.0.0 • Production
ContactPrivacyImpressum
What could cause a clicking noise when turning in a 2019 Toyota Camry XV70? - Toyota Camry
Home/Cars/Toyota/Camry/XV70 (2018-2024)/What could cause a clicking noise when turning in a 2019 Toyota Camry XV70?

What could cause a clicking noise when turning in a 2019 Toyota Camry XV70?

Toyota Camry XV70 (2018-2024)

Error Codes
2-4 hours
Time
medium
Difficulty
medium
Severity
Navigation
ProblemSymptomsDiagnosisSolution
ProblemSymptomsDiagnosisSolution
4 min read
688 words

Problem Statement

Learn how to diagnose and repair the clicking noise when turning in a 2019 Toyota Camry XV70, including symptoms, potential causes, and step-by-step instructions.

Affected Component
CV joints, wheel bearings, suspension components, brake components, tires
Estimated Time
2-4 hours

Symptoms

  • •clicking noise when turning
  • •popping noise during sharp turns
  • •noise when accelerating through a turn

Diagnostic Steps

  1. 1
  2. 2
  3. 3
  4. 4
  5. 5

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

  • ✓Test the affected component to ensure it functions correctly
  • ✓Check for any error codes or warning lights
  • ✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

  • •Follow the manufacturer's recommended maintenance schedule
  • •Address warning signs early before they develop into major issues
  • •Use quality parts and fluids recommended for your vehicle
  • •Keep detailed records of all repairs and maintenance

Tools & Equipment Required

  • •Floor jack
  • •Jack stands
  • •Lug wrench
  • •Torque wrench
  • •Screwdriver set
  • •Pliers
  • •CV joint grease (if applicable)
  • •Replacement CV joint or axle (if applicable)
  • •Suspension tool set (if applicable)

Additional Information

Affected Component
CV joints, wheel bearings, suspension components, brake components, tires
Estimated Time
2-4 hours
Difficulty
medium
Severity
medium
Tools Required
9 items

Related Faults

Loading...

Share this solution

Comments

Sign in to share your thoughts

Sign In

No comments yet

Be the first to share your thoughts

Back to Generation
Potential Causes
  1. Worn CV Joints: The most common cause of a clicking noise when turning is a failing constant velocity (CV) joint.
  2. Loose or Damaged Wheel Bearings: If the wheel bearings are loose or damaged, they can create a clicking noise during turns.
  3. Suspension Issues: Worn or damaged suspension components, such as struts or control arm bushings, can also cause noise.
  4. Brake Components: If brake components are loose or damaged, they may create noise during turns.
  5. Tire Issues: Uneven wear or damage to the tires can produce clicking sounds while turning.
Tools Required
  • Floor jack
  • Jack stands
  • Lug wrench
  • Torque wrench
  • Screwdriver set
  • Pliers
  • CV joint grease (if applicable)
  • Replacement CV joint or axle (if applicable)
  • Suspension tool set (if applicable)
Repair Instructions

Repairing or Replacing CV Joints

  1. Prepare Vehicle: Lift the vehicle and secure it with jack stands. Remove the front wheels with a lug wrench.
  2. Remove Axle:
    • Remove the axle nut using a socket and breaker bar.
    • Detach the lower control arm or suspension components if necessary to free the axle.
    • Slide the axle out from the hub assembly and remove it from the transmission.
  3. Inspect and Replace CV Joint:
    • Inspect the CV joint for wear. If it’s damaged, replace the entire axle or just the CV joint.
    • If replacing, remove the old CV joint by prying it off the axle shaft.
    • Install the new CV joint, ensuring it’s properly seated and secured.
  4. Reinstall Axle:
    • Slide the axle back into the transmission and hub assembly.
    • Reattach the suspension components and torque the axle nut to the manufacturer specifications.
  5. Reinstall Wheels: Put the wheels back on and torque the lug nuts in a star pattern.

Repairing Wheel Bearings

  1. Remove Wheel: Follow similar steps to remove the wheel as mentioned above.
  2. Remove Hub Assembly:
    • Remove the brake caliper and rotor.
    • Detach the hub assembly by removing the retaining bolts.
  3. Inspect Bearings:
    • Check the bearings for wear or damage. Replace if necessary.
  4. Install New Bearings:
    • Press the new bearings into the hub using a bearing press or appropriate tool.
  5. Reassemble: Reinstall the hub, rotor, and caliper, and torque all components to specifications.
Final Steps
  1. Test Drive: After repairs, perform a test drive to ensure the noise is gone.
  2. Final Inspection: Check for any signs of leakage or loose components after the test drive.

By following these detailed steps, you can diagnose and repair the clicking noise when turning in a 2019 Toyota Camry XV70 effectively. If the noise persists after these repairs, further investigation should be conducted with specialized equipment or by a professional technician.