FAULTBASE
Error CodesASKCars
© 2026 FAULTBASE
All rights reserved.
v2.0.0 • Production
ContactPrivacyImpressum
What should I check if the headlights are dim in my 2019 Toyota Camry XV70? - Toyota Camry
Home/Cars/Toyota/Camry/XV70 (2018-2024)/What should I check if the headlights are dim in my 2019 Toyota Camry XV70?

What should I check if the headlights are dim in my 2019 Toyota Camry XV70?

Toyota Camry XV70 (2018-2024)

Error Codes
1-2 hours
Time
medium
Difficulty
medium
Severity
Navigation
ProblemSymptomsDiagnosisSolution
ProblemSymptomsDiagnosisSolution
3 min read
585 words

Problem Statement

Learn how to diagnose and fix dim headlights on your 2019 Toyota Camry XV70 with step-by-step instructions and required tools.

Affected Component
headlights
Estimated Time
1-2 hours

Symptoms

  • •Headlights appear dim when turned on, especially at night.
  • •Headlights may flicker or vary in brightness.
  • •Dashboard lights and other electrical components may also appear dim.

Diagnostic Steps

  1. 1
  2. 2
  3. 3
  4. 4
  5. 5

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

  • ✓Test the affected component to ensure it functions correctly
  • ✓Check for any error codes or warning lights
  • ✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

  • •Follow the manufacturer's recommended maintenance schedule
  • •Address warning signs early before they develop into major issues
  • •Use quality parts and fluids recommended for your vehicle
  • •Keep detailed records of all repairs and maintenance

Tools & Equipment Required

  • •Multimeter
  • •Screwdriver set (flathead and Phillips)
  • •Wire brush or sandpaper
  • •Headlight bulb replacement (if necessary)
  • •Electrical contact cleaner
  • •Safety gloves and goggles

Additional Information

Affected Component
headlights
Estimated Time
1-2 hours
Difficulty
medium
Severity
medium
Tools Required
6 items

Related Faults

Loading...

Share this solution

Comments

Sign in to share your thoughts

Sign In

No comments yet

Be the first to share your thoughts

Back to Generation
Diagnosing Dim Headlights on a 2019 Toyota Camry XV70
Tools Required
  • Multimeter
  • Screwdriver set (flathead and Phillips)
  • Wire brush or sandpaper (for cleaning connections)
  • Headlight bulb replacement (if necessary)
  • Electrical contact cleaner
  • Safety gloves and goggles

Step 1: Inspect Headlight Bulbs

  1. Turn off the vehicle and ensure the headlights are switched off.
  2. Open the hood and locate the headlight assembly.
  3. Remove the headlight bulb by twisting it counterclockwise and pulling it out.
  4. Inspect the bulb for any signs of damage (burnt filament, discoloration, etc.).
  5. If the bulb is burnt out, replace it with a new bulb. Ensure it matches the specifications (usually H11 or similar for high/low beams).

Step 2: Check Headlight Connections

  1. Reinstall the bulb (if not replacing) and ensure it's seated properly.
  2. Inspect the connector for any signs of corrosion, dirt, or damage.
  3. Use a wire brush or sandpaper to clean any corrosion from the contacts.
  4. Apply electrical contact cleaner to the connector and allow it to dry.
  5. Reconnect the headlight bulb securely.

Step 3: Test Voltage at the Headlight Connector

  1. Set your multimeter to the DC voltage setting.
  2. With the headlights turned on, back-probe the headlight connector.
  3. Measure the voltage:
    • Normal voltage should be around 12-14 volts.
    • If the voltage is significantly lower, proceed to check the wiring and fuses.

Step 4: Inspect Fuses

  1. Locate the fuse box, typically found under the dashboard on the driver’s side or in the engine compartment.
  2. Refer to the owner’s manual for the specific fuse location for the headlights.
  3. Remove the headlight fuse and inspect it visually. If the wire inside is broken, replace it with a new fuse of the same amperage.

Step 5: Check Ground Connections

  1. Locate the ground wire for the headlights, usually found near the battery or on the vehicle frame.
  2. Inspect the ground connection for corrosion or loose fittings.
  3. Clean the ground connection point with a wire brush or sandpaper.
  4. Re-secure the ground wire.
Repair Instructions

Step 1: Replace Headlight Bulbs (if necessary)

  1. If the bulb is faulty, install a new bulb by inserting it into the socket and twisting it clockwise until secure.
  2. Repeat for both headlights if they are dim.

Step 2: Repair or Replace Wires (if necessary)

  1. If you found damaged wiring during your inspection, repair or replace the wiring as needed.
  2. Use electrical tape to secure any spliced areas.

Step 3: Verify the Repair

  1. Reconnect the battery (if disconnected).
  2. Turn on the headlights and check for brightness.
  3. Measure the voltage at the headlight connector again to ensure it is within normal limits (12-14 volts).
Final Check
  • Test Drive: Take the vehicle for a short drive at night to confirm that the headlights are functioning correctly and are bright enough.
  • Monitor: Keep an eye on the performance over the next few days to ensure the issue does not return.
Conclusion

If the headlights remain dim after following these steps, further issues such as a failing alternator, battery issues, or problems with the vehicle’s electrical system may need to be investigated by a professional technician.