FAULTBASE
Error CodesASKCars
© 2026 FAULTBASE
All rights reserved.
v2.0.0 • Production
ContactPrivacyImpressum
Why is my 2019 Toyota Camry making a grinding noise when braking? - Toyota Camry
Home/Cars/Toyota/Camry/XV70 (2018-2024)/Why is my 2019 Toyota Camry making a grinding noise when braking?

Why is my 2019 Toyota Camry making a grinding noise when braking?

Toyota Camry XV70 (2018-2024)

Error Codes
2-3 hours
Time
medium
Difficulty
medium
Severity
Navigation
ProblemSymptomsDiagnosisSolution
ProblemSymptomsDiagnosisSolution
4 min read
722 words

Problem Statement

Learn how to diagnose and repair the grinding noise when braking in a 2019 Toyota Camry with step-by-step instructions and required tools.

Affected Component
brake system
Estimated Time
2-3 hours

Symptoms

  • •Grinding noise when applying brakes
  • •Possible vibration felt through the brake pedal
  • •Reduced braking efficiency or responsiveness
  • •Notable noise when braking at low speeds or coming to a stop

Diagnostic Steps

  1. 1
  2. 2
  3. 3
  4. 4
  5. 5

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

  • ✓Test the affected component to ensure it functions correctly
  • ✓Check for any error codes or warning lights
  • ✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

  • •Follow the manufacturer's recommended maintenance schedule
  • •Address warning signs early before they develop into major issues
  • •Use quality parts and fluids recommended for your vehicle
  • •Keep detailed records of all repairs and maintenance

Tools & Equipment Required

  • •Jack and jack stands
  • •Lug wrench
  • •Torque wrench
  • •Brake pad gauge
  • •Micrometer or caliper gauge
  • •Brake cleaner
  • •Basic hand tools (ratchet set, wrenches, screwdrivers)
  • •Gloves and safety glasses

Additional Information

Affected Component
brake system
Estimated Time
2-3 hours
Difficulty
medium
Severity
medium
Tools Required
8 items

Related Faults

Loading...

Share this solution

Comments

Sign in to share your thoughts

Sign In

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnosing and Repairing a Grinding Noise When Braking in a 2019 Toyota Camry

Step 1: Initial Inspection
  1. Visual Inspection of Brake Components
    • Check for visible wear or damage to brake pads and rotors.
    • Look for any debris lodged between the rotor and brake components.
    • Inspect brake calipers for leaks or sticking.
Step 2: Check Brake Pad Thickness
  1. Use a Brake Pad Gauge
    • Measure the thickness of the brake pads.
    • Minimum thickness should be around 3mm; if below, they need replacement.
Step 3: Inspect Brake Rotors
  1. Check Rotor Condition
    • Look for scoring, grooves, or uneven wear on the rotor surface.
    • Use a micrometer to measure rotor thickness; ensure they are within specification.
    • If rotors are below the minimum thickness or warped, they may need resurfacing or replacement.
Step 4: Brake Hardware Inspection
  1. Examine Brake Hardware
    • Check the condition of the brake shims, clips, and anti-rattle springs.
    • Ensure no parts are missing or damaged.
Step 5: Test Drive
  1. Road Test the Vehicle
    • Drive the vehicle in a controlled environment and apply brakes at various speeds.
    • Listen for noise, and note any differences in sound or feel when braking.
Tools Required
  • Jack and jack stands
  • Lug wrench
  • Torque wrench
  • Brake pad gauge
  • Micrometer or caliper gauge
  • Brake cleaner
  • Basic hand tools (ratchet set, wrenches, screwdrivers)
  • Gloves and safety glasses
Repair Instructions
Step 1: Raise the Vehicle
  1. Secure the Vehicle
    • Park the vehicle on a flat surface, engage the parking brake, and turn off the engine.
    • Loosen the lug nuts slightly.
    • Use a jack to lift the front or rear (depending on where the noise is coming from) of the vehicle and secure it with jack stands.
Step 2: Remove the Wheel
  1. Take Off the Wheel
    • Remove the lug nuts completely and take off the wheel to access the brake assembly.
Step 3: Remove the Brake Caliper
  1. Caliper Removal
    • Remove the caliper mounting bolts using a ratchet and appropriate socket.
    • Carefully slide the caliper off the rotor. Use a bungee cord or rope to hang it up, preventing stress on the brake line.
Step 4: Inspect and Replace Brake Pads

  1. Remove Old Brake Pads

    • Slide the brake pads out of the caliper bracket.
    • Inspect for wear, and if the pads are below the minimum thickness, replace them.

  2. Install New Brake Pads

    • Insert new brake pads into the caliper bracket, ensuring they are seated properly.
Step 5: Inspect and Replace Brake Rotors (if necessary)

  1. Remove the Rotor

    • If rotors are scored or below specification, remove the rotor by unscrewing any retaining screws and sliding it off the hub.

  2. Install New Rotor

    • Place the new rotor onto the hub and secure it with screws if applicable.
Step 6: Reinstall the Brake Caliper
  1. Caliper Reinstallation
    • Compress the caliper piston using a brake caliper tool or C-clamp to allow enough clearance for the new pads.
    • Slide the caliper over the new pads and secure it with mounting bolts. Torque the bolts to manufacturer specifications.
Step 7: Reinstall the Wheel
  1. Put the Wheel Back On
    • Reinstall the wheel and hand-tighten the lug nuts.
    • Lower the vehicle and torque the lug nuts to the manufacturer’s specifications in a crisscross pattern.
Step 8: Final Checks
  1. Test the Brakes
    • Start the vehicle and pump the brake pedal several times to ensure proper engagement.
    • Check for any remaining noise during a test drive.
Step 9: Clean Up
  1. Dispose of Old Parts
    • Properly dispose of old brake pads and any other parts replaced. Clean the workspace.
Conclusion

If the grinding noise persists after replacing the brake pads and inspecting the rotors, further investigation into the brake calipers, brake lines, or even suspension components may be necessary. If in doubt, consult a certified technician for further diagnosis.