FAULTBASE
Error CodesASKCars
© 2026 FAULTBASE
All rights reserved.
v2.0.0 • Production
ContactPrivacyImpressum
Why is my Toyota Camry XV70 making a grinding noise when braking? - Toyota Camry
Home/Cars/Toyota/Camry/XV70 (2018-2024)/Why is my Toyota Camry XV70 making a grinding noise when braking?

Why is my Toyota Camry XV70 making a grinding noise when braking?

Toyota Camry XV70 (2018-2024)

Error Codes
2-3 hours
Time
medium
Difficulty
medium
Severity
Navigation
ProblemSymptomsDiagnosisSolution
ProblemSymptomsDiagnosisSolution
4 min read
715 words

Problem Statement

Learn about the causes, symptoms, diagnostic steps, and repair instructions for grinding noise when braking on the Toyota Camry XV70.

Affected Component
brake system
Estimated Time
2-3 hours

Symptoms

  • •A distinct grinding noise occurs when you apply the brakes.
  • •The noise may be more pronounced during hard braking or at lower speeds.
  • •You may also feel a vibration in the brake pedal or steering wheel.
  • •Possible reduction in braking efficiency, leading to longer stopping distances.

Diagnostic Steps

  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
  6. 6

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

  • ✓Test the affected component to ensure it functions correctly
  • ✓Check for any error codes or warning lights
  • ✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

  • •Follow the manufacturer's recommended maintenance schedule
  • •Address warning signs early before they develop into major issues
  • •Use quality parts and fluids recommended for your vehicle
  • •Keep detailed records of all repairs and maintenance

Tools & Equipment Required

  • •Jack and jack stands
  • •Lug wrench
  • •Torque wrench
  • •Brake tool set (pad spreader, caliper tool)
  • •Micrometer (for rotor thickness measurement)
  • •Brake cleaner
  • •Safety goggles and gloves

Additional Information

Affected Component
brake system
Estimated Time
2-3 hours
Difficulty
medium
Severity
medium
Tools Required
7 items

Related Faults

Loading...

Share this solution

Comments

Sign in to share your thoughts

Sign In

No comments yet

Be the first to share your thoughts

Back to Generation

Grinding Noise When Braking on Toyota Camry XV70 (2018-2024)

Tools Required
  • Jack and jack stands
  • Lug wrench
  • Torque wrench
  • Brake tool set (pad spreader, caliper tool)
  • Micrometer (for rotor thickness measurement)
  • Brake cleaner
  • Safety goggles and gloves
Repair Instructions
Step 1: Jack Up the Vehicle
  • Park the vehicle on a flat surface.
  • Engage the parking brake and loosen the lug nuts slightly.
  • Use a jack to lift the vehicle and secure it with jack stands.
Step 2: Remove the Wheel
  • Completely remove the lug nuts and take off the wheel to expose the brake assembly.
Step 3: Inspect and Remove Brake Pads
  • Locate the brake caliper and remove the bolts securing it (usually 12mm or 14mm).
  • Slide the caliper off the rotor and suspend it using a bungee cord or a similar method to avoid stress on the brake line.
  • Remove the brake pads from the caliper bracket. If they are worn unevenly or below specifications, replace them.
Step 4: Inspect and Replace Rotors (if needed)
  • If the rotors are scored, warped, or below the minimum thickness, they should be replaced.
  • Remove the caliper bracket bolts and take off the caliper bracket.
  • Remove the rotor by unscrewing any retaining screws if present and pulling it off the hub.
  • Install new rotors, ensuring they are clean and free of oil.
Step 5: Install New Brake Pads
  • Apply brake grease to the backing of the new pads and any contact points.
  • Install the new pads into the caliper bracket.
Step 6: Reinstall Caliper
  • Reinstall the caliper over the new pads and tighten the caliper bolts to the manufacturer’s specifications (usually found in a repair manual).
Step 7: Reattach the Wheel
  • Place the wheel back on and hand-tighten the lug nuts.
  • Lower the vehicle from the jack stands and then torque the lug nuts to the specified torque (usually around 75-80 lb-ft for the Camry).
Step 8: Test Drive
  • Start the vehicle and pump the brakes a few times to ensure the pads seat properly against the rotors.
  • Perform a test drive to ensure that the grinding noise is resolved and the brakes function correctly.
Step 9: Final Inspection
  • After the test drive, recheck the brake system for any leaks or unusual sounds.
Conclusion

If the grinding noise persists after replacing the brake pads and/or rotors, further investigation may be required, such as examining the brake lines, master cylinder, or the ABS system. If you're uncomfortable performing these steps, or if the issue is not resolved, it’s advisable to consult a professional automotive technician for assistance.