can a bad alignment cause steering vibration in a Toyota Camry XV70 (2018-2024)?

Solution

1. Preparation

• Gather necessary tools and parts.
• Ensure the vehicle is parked on a level surface and the engine is off.
• Safety warning: Engage the parking brake and use wheel chocks.

2. Inspect and Adjust Alignment

• Tools required: Alignment machine, torque wrench, socket set.
• Sub-steps:
  1. Position the alignment machine according to the manufacturer’s instructions.
  2. Measure the camber, caster, and toe angles of all four wheels.
  3. If any angles are out of specification, consult the manufacturer’s specifications for the correct adjustments.
  4. Loosen the adjustment bolts for the necessary components (e.g., control arms, tie rods).
  5. Make adjustments to bring the angles within specifications.
  6. Tighten the adjustment bolts to the specified torque values.

3. Test Drive and Final Check

• Sub-steps:
  1. Remove the alignment machine and take the vehicle for a test drive.
  2. Verify that the steering wheel is centered and the vibration is gone.
  3. Check tire wear and alignment settings after the test drive to ensure proper alignment has been achieved.