how do I clear the service light on my Toyota Camry XV70 (2018-2024)

Toyota Camry XV80 (2025-Present)

Error Codes

5-10 minutes

Time

easy

Difficulty

low

Severity

2 min read

350 words

Problem Statement

Learn how to clear the service light on your 2018-2024 Toyota Camry XV70. Step-by-step guide with diagnostic steps and verification instructions.

Affected Component

Electrical

Estimated Time

5-10 minutes

⚠️ Safety Warnings

Important safety information - read before proceeding

•Ensure the vehicle is stationary and in park before performing this procedure.

Symptoms

•Service light is illuminated on the dashboard
•Vehicle may display a maintenance reminder message
•No other noticeable performance issues or symptoms

Diagnostic Steps

1
Ensure the vehicle is in park and the ignition is turned off.
2
Turn the ignition key to the 'ON' position without starting the engine (or press the start button twice without pressing the brake).
3
Press the gas pedal three times within five seconds.
4
Turn the ignition off and then back on to check if the service light is cleared.

Solution

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•None required

Parts Required

•None required

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Ensure the vehicle is in park and the ignition is turned off.
2
Turn the ignition key to the 'ON' position without starting the engine (or press the start button twice without pressing the brake).
3
Press the gas pedal three times within five seconds.
4
Turn the ignition off and then back on to check if the service light is cleared.

Solution

1. Preparation

Gather necessary tools: none required for this process.
Ensure the vehicle is parked on a flat surface and the ignition is completely off.

2. Accessing the Ignition

Insert the key into the ignition or ensure you have the key fob ready.
Ensure all doors are closed and the vehicle is in the "OFF" position.

3. Clearing the Service Light

Turn the ignition to the "ON" position (do not start the engine).
Quickly press the accelerator pedal three times within five seconds.
Turn the ignition back to the "OFF" position.

4. Verify the Reset

Turn the ignition back to the "ON" position and check if the service light is no longer illuminated.
If the light is still on, repeat the above steps.