how to adjust the steering wheel angle on my Toyota Camry XV70 (2018-2024)?

Solution

1. Preparation

• Tools Required: Alignment machine, jack and jack stands, wrench set, torque wrench, steering wheel puller (if necessary).
• Confirm that the vehicle is on a level surface and securely lifted.

2. Adjust Steering Angle

1. Check Alignment Settings:

   • Use the alignment machine to read the current camber, caster, and toe settings.
   • Note any settings that are out of the manufacturer’s specifications.

2. Adjust Toe Angle:

   • Loosen the lock nuts on the tie rod ends using a wrench.
   • Use a wrench to turn the tie rod ends clockwise or counterclockwise to achieve the correct toe angle as specified by the manufacturer (usually around 0.0 to 0.1 degrees for most vehicles).
   • Re-tighten the lock nuts securely to the specified torque.

3. Center the Steering Wheel:

   • If necessary, remove the steering wheel using a steering wheel puller.
   • Reinstall the steering wheel in the centered position.
   • Ensure that the steering angle sensor (if applicable) is reset according to manufacturer specifications.

3. Final Checks

• Re-check the alignment settings with the alignment machine after adjustments.
• Make sure all lock nuts are tightened to the torque specifications.