how to fix P0455 code on Toyota Camry XV70 (2018-2024)

Solution

1. Preparation

• Gather necessary tools and parts.
• Disconnect the vehicle battery to ensure safety.
• Raise the vehicle if needed using a jack and secure with jack stands.

2. Inspect and Replace Gas Cap

• Tools Required: None specific.
• Remove the gas cap and visually inspect for damage.
• If damaged or not sealing properly, replace it with a new OEM gas cap.

3. Inspect EVAP Hoses and Connections

• Tools Required: Pliers, screwdriver.
• Trace the EVAP hoses from the fuel tank to the engine bay.
• Look for cracks, loose connections, or signs of wear.
• Replace any damaged hoses or reattach any loose connections.

4. Perform Smoke Test

• Tools Required: Smoke machine.
• Connect the smoke machine to the EVAP system through the service port.
• Activate the smoke machine and look for any smoke escaping from the system, indicating leaks.
• Repair or replace any components where smoke is detected.

5. Check and Replace Purge Valve

• Tools Required: Socket set, wrench.
• Locate the EVAP purge valve (usually near the intake manifold).
• Disconnect electrical connectors and hoses.
• Remove the purge valve and test it for proper operation using a multimeter (check resistance).
• If faulty, replace with a new valve and reconnect.

6. Inspect and Replace EVAP Canister

• Tools Required: Socket set, wrench.
• Locate the EVAP canister (usually under the vehicle near the fuel tank).
• Remove the canister and visually inspect for cracks or blockages.
• If damaged, replace the canister and reconnect all hoses securely.