how to reset maintenance light on Toyota Camry XV70 (2018-2024)

Toyota Camry XV80 (2025-Present)

Error Codes

10-15 minutes

Time

easy

Difficulty

low

Severity

2 min read

376 words

Problem Statement

Learn how to reset the maintenance light on your Toyota Camry XV70 (2018-2024) with this step-by-step guide. Simple instructions for a quick fix.

Affected Component

Electrical

Estimated Time

10-15 minutes

⚠️ Safety Warnings

Important safety information - read before proceeding

•Ensure the vehicle is in a secure location and not in motion during the reset process.

Symptoms

•Maintenance light illuminated on the dashboard
•Reminder for oil change or other scheduled services
•No other performance issues observed

Diagnostic Steps

1
Ensure the vehicle is in the 'ON' position (not running).
2
Press the odometer button on the instrument cluster until the trip meter is displayed.
3
Turn off the ignition.
4
While holding the odometer button, turn the ignition back to the 'ON' position without starting the engine.
5
Continue holding the odometer button until the maintenance light blinks and turns off.

Solution

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•None specific for this procedure.

Parts Required

•None required for this reset.

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Ensure the vehicle is in the 'ON' position (not running).
2
Press the odometer button on the instrument cluster until the trip meter is displayed.
3
Turn off the ignition.
4
While holding the odometer button, turn the ignition back to the 'ON' position without starting the engine.
5
Continue holding the odometer button until the maintenance light blinks and turns off.

Solution

1. Preparation

Gather necessary tools: None required for this reset.
Ensure the vehicle is parked and in a safe location.

2. Reset Maintenance Light

Set Ignition Position
- Turn the ignition key to the "ON" position (do not start the engine).
Display Trip Meter
- Press and hold the odometer button until the trip meter is displayed.
Turn Off Ignition
- Turn the ignition key to the "OFF" position.
Hold Odometer Button
- While continuing to hold the odometer button, turn the ignition back to the "ON" position.
Wait for Light to Reset
- Keep holding the odometer button until the maintenance light blinks and then turns off, indicating a successful reset.

3. Final Steps

Release the odometer button.
Turn the ignition off and then back on to confirm that the maintenance light is no longer illuminated.