FAULTBASE
Error CodesASKCars
© 2026 FAULTBASE
All rights reserved.
v2.0.0 • Production
ContactPrivacyImpressum
how to reset the maintenance light on my Toyota Camry XV70 (2018-2024)? - Toyota Camry
Home/Cars/Toyota/Camry/XV80 (2025-Present)/how to reset the maintenance light on my Toyota Camry XV70 (2018-2024)?

how to reset the maintenance light on my Toyota Camry XV70 (2018-2024)?

Toyota Camry XV80 (2025-Present)

Error Codes
5-10 minutes
Time
easy
Difficulty
low
Severity
Navigation
ProblemSymptomsDiagnosisSolution
ProblemSymptomsDiagnosisSolution
2 min read
362 words

Problem Statement

Learn how to reset the maintenance light on your 2018-2024 Toyota Camry XV70. Step-by-step guide to ensure your vehicle is ready for the road.

Affected Component
Electrical
Estimated Time
5-10 minutes

⚠️ Safety Warnings

Important safety information - read before proceeding

  • •Ensure the vehicle is in 'Park' or 'Neutral' and on a level surface when performing the reset.

Symptoms

  • •Maintenance light illuminated on the dashboard
  • •Notification for scheduled maintenance displayed
  • •No other performance issues related to the vehicle

Diagnostic Steps

  1. 1
  2. 2
  3. 3
  4. 4
  5. 5

Solution

Verification

After completing the repair, verify that the issue has been resolved:

  • ✓Test the affected component to ensure it functions correctly
  • ✓Check for any error codes or warning lights
  • ✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

  • •Follow the manufacturer's recommended maintenance schedule
  • •Address warning signs early before they develop into major issues
  • •Use quality parts and fluids recommended for your vehicle
  • •Keep detailed records of all repairs and maintenance

Tools & Equipment Required

  • •None specifically required, but a clean cloth may be helpful

Parts Required

  • •None.

Additional Information

Affected Component
Electrical
Estimated Time
5-10 minutes
Difficulty
easy
Severity
low
Tools Required
1 item
Parts Required
1 item

Related Faults

Loading...

Share this solution

Comments

Sign in to share your thoughts

Sign In

No comments yet

Be the first to share your thoughts

Back to Generation
Solution
1. Preparation
  • Ensure the vehicle is parked on a flat surface.
  • Gather necessary tools, if any (e.g., a clean cloth for dashboard).
2. Reset the Maintenance Light

  1. Turn on the Ignition

    • Insert the key and turn the ignition to the "ON" position (do not start the engine).

  2. Access the Odometer Display

    • Locate the odometer button on the dashboard.
    • Press the button until the odometer shows "000000".

  3. Turn Off the Ignition

    • Turn the ignition switch to the "OFF" position.

  4. Initiate Reset Procedure

    • Press and hold the odometer button again while turning the ignition back to the "ON" position.

  5. Complete the Reset

    • Continue to hold the odometer button until you see the maintenance light blink and then go off, indicating the reset is complete.