how to reset the tire pressure light on my Toyota Camry XV50 (2012-2017)?

Toyota Camry XV80 (2025-Present)

15-30 minutes

Time

easy

Difficulty

medium

Severity

3 min read

421 words

Problem Statement

Learn how to reset the tire pressure light on your 2012-2017 Toyota Camry XV50. Step-by-step guide with diagnostic steps and safety tips.

Affected Component

Electrical

Estimated Time

15-30 minutes

Important safety information - read before proceeding

•Ensure the vehicle is parked on a level surface when checking tire pressures.
•Always allow the tires to cool down before checking pressures to avoid inaccurate readings.

1
Check tire pressures using a tire pressure gauge to ensure all tires, including the spare, are inflated to the manufacturer's recommended PSI.
2
Inspect each tire for visible damage or leaks that may cause incorrect pressure readings.
3
Verify if the tire pressure monitoring system (TPMS) is functioning properly by using an OBD-II scanner to check for any related error codes.

After completing the repair, verify that the issue has been resolved:

To prevent this issue from occurring again:

No comments yet

Be the first to share your thoughts

Diagnostic Steps

1
Check tire pressures using a tire pressure gauge to ensure all tires, including the spare, are inflated to the manufacturer's recommended PSI.
2
Inspect each tire for visible damage or leaks that may cause incorrect pressure readings.
3
Verify if the tire pressure monitoring system (TPMS) is functioning properly by using an OBD-II scanner to check for any related error codes.

Solution

1. Preparation

2. Resetting the Tire Pressure Light

Turn the Ignition On:
- Insert the key and turn it to the "On" position without starting the engine.
Locate the TPMS Reset Button:
- Find the TPMS reset button, typically located under the steering wheel or near the driver's side door.
Press and Hold the TPMS Reset Button:
- Press and hold the TPMS reset button until the tire pressure light blinks three times, then release the button.
Start the Engine:
- Start the vehicle and allow it to run for about 20 minutes to let the system recalibrate.
Check the Tire Pressure Light:
- After driving for a short distance, check if the warning light has turned off. If it remains on, repeat the reset process or consult a professional.