how to reset the tire pressure light on my Toyota Camry XV70 (2018-2024)?

Toyota Camry XV80 (2025-Present)

Error Codes

15-30 minutes

Time

easy

Difficulty

medium

Severity

3 min read

435 words

Problem Statement

Learn how to reset the tire pressure light on your 2018-2024 Toyota Camry XV70. Step-by-step guide with diagnostic steps and solutions.

Affected Component

Electrical

Estimated Time

15-30 minutes

⚠️ Safety Warnings

Important safety information - read before proceeding

•Always check tire pressures when tires are cold for accurate readings.

Symptoms

•Tire pressure warning light is illuminated on the dashboard
•Warning message displayed on the multi-information display
•Possible fluctuation in tire pressure readings
•Uneven tire wear may occur if not addressed

Diagnostic Steps

1
Check all tire pressures using a tire pressure gauge to ensure they are at the recommended levels.
2
Inspect each tire for visible damage or leaks.
3
Verify that the spare tire is also at the correct pressure, as some systems monitor it too.
4
Ensure that the vehicle is in a stationary position and the engine is running for the reset procedure.

Solution

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•Tire pressure gauge
•OBD-II scanner

Parts Required

•None required for reset; ensure tires are properly inflated.

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Check all tire pressures using a tire pressure gauge to ensure they are at the recommended levels.
2
Inspect each tire for visible damage or leaks.
3
Verify that the spare tire is also at the correct pressure, as some systems monitor it too.
4
Ensure that the vehicle is in a stationary position and the engine is running for the reset procedure.

Solution

1. Preparation

Gather necessary tools: Tire pressure gauge and OBD-II scanner (if needed).
Ensure all tires are inflated to the recommended pressure as indicated on the driver’s side door jamb sticker.

2. Reset TPMS

Locate the TPMS Reset Button:
- Open the driver’s side door and look for the TPMS reset button beneath the steering column or near the fuse box.
Turn the Ignition On:
- Insert the key and turn the ignition to the "On" position without starting the engine.
Press and Hold the TPMS Reset Button:
- Press and hold the TPMS reset button until the tire pressure warning light blinks three times, then release it.
Start the Engine:
- Start the engine and allow it to run for a few minutes, ensuring the light goes out.
Test Drive the Vehicle:
- Drive the vehicle for a short distance (approximately 10 minutes) to confirm that the TPMS light remains off.

3. Recheck Tire Pressure

After the reset, recheck the tire pressures to ensure they remain at the recommended levels.