my Toyota Camry XV50 (2012-2017) remote key fob not working what to do

Toyota Camry XV80 (2025-Present)

Error Codes

30 minutes

Time

easy

Difficulty

medium

Severity

3 min read

438 words

Problem Statement

Learn how to troubleshoot and fix a non-functioning key fob for your 2012-2017 Toyota Camry XV50. Step-by-step guide included.

Affected Component

Electrical

Estimated Time

30 minutes

⚠️ Safety Warnings

Important safety information - read before proceeding

•Handle the battery with care and dispose of the old battery properly, as it may be hazardous to the environment.

Symptoms

•Remote key fob is unresponsive
•Warning light on the dashboard for key fob or security system
•Inability to lock or unlock doors remotely
•Difficulty starting the engine (if equipped with push-button start)
•Battery in the fob may need replacement (if indicated)

Diagnostic Steps

1
Inspect the battery in the key fob for corrosion or damage.
2
Replace the key fob battery with a new one (commonly CR2032 or CR2025).
3
Test the key fob after battery replacement to see if it functions.
4
Check the vehicle’s receiver unit for faults by using another working key fob.
5
Scan the vehicle for error codes related to the keyless entry system using an OBD-II scanner.

Solution

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•Small screwdriver
•Flathead screwdriver

Parts Required

•Key fob battery (CR2032 or CR2025)

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Inspect the battery in the key fob for corrosion or damage.
2
Replace the key fob battery with a new one (commonly CR2032 or CR2025).
3
Test the key fob after battery replacement to see if it functions.
4
Check the vehicle’s receiver unit for faults by using another working key fob.
5
Scan the vehicle for error codes related to the keyless entry system using an OBD-II scanner.

Solution

1. Preparation

Gather tools required: small screwdriver, flathead screwdriver, new key fob battery (CR2032 or CR2025).
Ensure the vehicle is in a safe area and turned off.

2. Open the Key Fob

Use a small flathead screwdriver to gently pry open the key fob casing at the seam.
Carefully separate the two halves of the fob without damaging the internal components.

3. Replace the Battery

Remove the old battery from the key fob by noting the orientation (positive side facing up).
Insert the new battery in the same orientation as the old one.

4. Reassemble the Key Fob

Align the two halves of the key fob and press them together firmly until they click into place.
Ensure there are no gaps or misalignments in the casing.

5. Test the Key Fob

Stand near the vehicle and press the lock/unlock buttons to test functionality.
If applicable, check if the engine starts with the push-button start.