why does my Toyota Camry XV50 (2012-2017) feel like it’s losing traction?

Toyota Camry XV80 (2025-Present)

Error Codes

2-4 hours

Time

medium

Difficulty

medium

Severity

3 min read

566 words

Problem Statement

Discover how to diagnose and fix loss of traction in Toyota Camry XV50 (2012-2017). Step-by-step guide with symptoms, diagnostic steps, and solutions.

Affected Component

Suspension

Estimated Time

2-4 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

•Always use jack stands when working under the vehicle.
•Ensure the vehicle is in park and ignition is off before starting diagnostics.

Symptoms

•Slipping or skidding during acceleration
•Difficulty maintaining control on turns
•Warning light for traction control illuminated
•Increased tire wear or uneven tire tread
•Noise from tires during acceleration or cornering

Diagnostic Steps

1
Inspect tire condition and tread depth for uneven wear or damage.
2
Check tire pressure to ensure it is within manufacturer's specifications.
3
Scan for error codes using an OBD-II scanner to identify traction control system issues.
4
Inspect the traction control system components, including wheel speed sensors.
5
Examine the suspension system for any damaged or worn-out parts.
6
Test the brake system for proper function, as it may engage unexpectedly.

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•Jack and jack stands
•Lug wrench
•OBD-II scanner
•Tire pressure gauge
•Multimeter

Parts Required

•Replacement tires (if needed)
•Brake pads/rotors (if needed)
•Wheel speed sensors (if faulty)

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Inspect tire condition and tread depth for uneven wear or damage.
2
Check tire pressure to ensure it is within manufacturer's specifications.
3
Scan for error codes using an OBD-II scanner to identify traction control system issues.
4
Inspect the traction control system components, including wheel speed sensors.
5
Examine the suspension system for any damaged or worn-out parts.
6
Test the brake system for proper function, as it may engage unexpectedly.

Solution

1. Preparation

Tools Required: Jack and jack stands, lug wrench, OBD-II scanner, tire pressure gauge, multimeter.
Ensure the vehicle is parked on a level surface and the ignition is off before starting work.

2. Inspect and Replace Tires

Sub-steps:
1. Remove the wheel covers or hubcaps if applicable.
2. Loosen the lug nuts slightly while the vehicle is on the ground.
3. Jack up the vehicle and secure it on jack stands.
4. Fully remove the lug nuts and take off the tires for inspection.
5. Measure tread depth; replace tires if tread is below 2/32 inches.
6. Inspect for bulges, cracks, or foreign objects in the tires.
7. Reinstall tires in a crisscross pattern and torque lug nuts to manufacturer specifications (typically 76 ft-lbs).

3. Check and Adjust Tire Pressure

Sub-steps:
1. Use a tire pressure gauge to measure the pressure in all tires.
2. Inflate or deflate tires to match the recommended pressure found on the driver’s side door jamb.
3. Recheck pressures after adjusting.

4. Traction Control System Inspection

Sub-steps:
1. Connect the OBD-II scanner to the vehicle and read any stored error codes.
2. Address any codes related to the traction control system by inspecting corresponding components.
3. Test wheel speed sensors using a multimeter to ensure they are functioning correctly.

5. Suspension and Brake System Inspection

Sub-steps:
1. Visually inspect the suspension components for signs of wear or damage (e.g., struts, control arms).
2. Check brake pads and rotors for wear; replace if necessary.
3. Ensure all brake calipers are functioning properly without binding.