why does my Toyota Camry XV70 (2018-2024) feel like it’s swaying while driving?

Toyota Camry XV80 (2025-Present)

Error Codes

2-4 hours

Time

medium

Difficulty

medium

Severity

3 min read

524 words

Problem Statement

Learn how to diagnose and fix the swaying sensation in your Toyota Camry XV70. Step-by-step guide with diagnostic procedures and repair instructions.

Affected Component

Suspension

Estimated Time

2-4 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

•Always use jack stands when working under a vehicle.
•Allow the vehicle to cool before inspecting suspension components.

Symptoms

•Swaying or wandering sensation while driving
•Increased body roll during turns
•Uneven tire wear
•Steering feels loose or unresponsive
•Noise from the suspension when driving over bumps

Diagnostic Steps

1
Inspect tire pressure to ensure it meets manufacturer's specifications.
2
Check for uneven tire wear patterns indicating alignment or suspension issues.
3
Visually inspect suspension components for signs of wear or damage, including struts, shocks, and bushings.
4
Perform a wheel alignment check to determine if the vehicle is out of specification.
5
Test the steering system for play or looseness by moving the steering wheel while the vehicle is stationary.
6
Examine the sway bar links and bushings for wear and proper attachment.

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•Tire pressure gauge
•Air compressor
•Socket set
•Torque wrench
•Jack
•Jack stands
•Spring compressor
•Wrench set

Parts Required

•Struts or shocks (if worn)
•Sway bar links and bushings

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Inspect tire pressure to ensure it meets manufacturer's specifications.
2
Check for uneven tire wear patterns indicating alignment or suspension issues.
3
Visually inspect suspension components for signs of wear or damage, including struts, shocks, and bushings.
4
Perform a wheel alignment check to determine if the vehicle is out of specification.
5
Test the steering system for play or looseness by moving the steering wheel while the vehicle is stationary.
6
Examine the sway bar links and bushings for wear and proper attachment.

Solution

1. Preparation

Gather necessary tools and parts.
Park the vehicle on a level surface and engage the parking brake.
Ensure all safety equipment is available.

2. Tire Pressure Adjustment

Tools Required: Tire pressure gauge, air compressor.
Check each tire’s pressure and inflate or deflate them to the recommended levels according to the owner's manual.

3. Replace Worn Suspension Components

Tools Required: Socket set, torque wrench, jack, jack stands, and possibly a spring compressor.
Remove the wheels to access suspension components.
Inspect and replace any worn or damaged struts or shocks:
1. Unbolt the upper strut mount and lower strut bolts.
2. Carefully remove the strut assembly.
3. Install the new strut, ensuring it is properly torqued to specifications.

4. Check and Replace Sway Bar Links

Tools Required: Wrench set, socket set.
Inspect the sway bar links and bushings:
1. If worn, remove the bolts securing the sway bar links to the sway bar and suspension components.
2. Install the new sway bar links and torque the bolts to the manufacturer's specifications.

5. Wheel Alignment

Tools Required: Wheel alignment machine (usually performed at a shop).
After replacing components, take the vehicle to a professional for a four-wheel alignment to ensure proper handling.