why does my Toyota Camry XV70 (2018-2024) shake when I brake?

Toyota Camry XV80 (2025-Present)

Error Codes

2-4 hours

Time

medium

Difficulty

high

Severity

3 min read

531 words

⚠️ Safety Warning

This issue requires immediate attention. If you are not experienced with automotive repairs, consult a professional mechanic. Working on critical systems can be dangerous.

Problem Statement

Learn how to diagnose and fix brake shaking issues in the 2018-2024 Toyota Camry XV70. Step-by-step guide with symptoms, diagnostic steps, and repair instructions.

Affected Component

Brakes

Estimated Time

2-4 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

•Always disconnect the battery when working on the braking system.
•Ensure the vehicle is securely lifted and supported before beginning work.

Symptoms

•Steering wheel shakes during braking
•Vibration felt in the brake pedal
•Uneven wear on brake pads or rotors
•Noise coming from the brakes (squeaking or grinding)
•Increased stopping distance
•Pulling to one side when braking

Diagnostic Steps

1
Inspect brake pads for uneven wear or damage.
2
Check brake rotors for warping or scoring.
3
Examine suspension components (control arms, tie rods) for wear or damage.
4
Review tire condition and pressure; check for uneven tire wear.
5
Use a dial indicator to measure rotor runout.
6
Scan for any error codes related to the braking system.

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•Socket set
•Torque wrench
•Jack and jack stands
•Dial indicator
•Brake cleaner

Parts Required

•Brake pads
•Brake rotors (if warped or damaged)

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Inspect brake pads for uneven wear or damage.
2
Check brake rotors for warping or scoring.
3
Examine suspension components (control arms, tie rods) for wear or damage.
4
Review tire condition and pressure; check for uneven tire wear.
5
Use a dial indicator to measure rotor runout.
6
Scan for any error codes related to the braking system.

Solution

1. Preparation

Gather tools and parts needed for the repair.
Park the vehicle on a level surface and engage the parking brake.
Wear safety glasses and gloves.

2. Lift the Vehicle

Use a jack to lift the front of the vehicle and secure it with jack stands.
Remove the front wheels using a socket set.

3. Inspect and Replace Brake Pads

Inspect Brake Pads:
- Remove the caliper bolts with a socket wrench.
- Slide the caliper off the rotor and support it without stretching the brake line.
- Check the pads for uneven wear; replace if necessary.
Replace Brake Pads:
- Remove the old brake pads and install new ones.
- Apply anti-squeal grease on the back of the pads.

4. Inspect and Replace Brake Rotors

Inspect Rotors:
- Check for warping using a dial indicator.
- Measure thickness; replace if below manufacturer's specifications.
Replace Rotors:
- Remove the caliper bracket bolts and the rotor.
- Install the new rotor, ensuring it is clean and free of debris.

5. Reassemble Components

Reattach the caliper and secure it with bolts to the specified torque (typically 75 ft-lbs).
Reinstall the front wheels and lower the vehicle.

6. Test Brake System

Pump the brake pedal to seat the pads against the rotors.
Conduct a test drive to check for any remaining vibrations.