FAULTBASE
Error CodesASKCars
© 2026 FAULTBASE
All rights reserved.
v2.0.0 • Production
ContactPrivacyImpressum
how to reset maintenance light on my Toyota Corolla E140 (2006-2013) - Toyota Corolla
Home/Cars/Toyota/Corolla/E140 (2006-2013)/how to reset maintenance light on my Toyota Corolla E140 (2006-2013)

how to reset maintenance light on my Toyota Corolla E140 (2006-2013)

Toyota Corolla E140 (2006-2013)

Error Codes
10-15 minutes
Time
easy
Difficulty
low
Severity
Navigation
ProblemSymptomsDiagnosisSolution
ProblemSymptomsDiagnosisSolution
2 min read
375 words

Problem Statement

Learn how to reset the maintenance light on your 2006-2013 Toyota Corolla E140 with this step-by-step guide. Quick and easy procedure.

Affected Component
Electrical
Estimated Time
10-15 minutes

⚠️ Safety Warnings

Important safety information - read before proceeding

  • •Ensure the vehicle is in park (automatic) or neutral (manual) to prevent rolling.

Symptoms

  • •Maintenance light illuminated on the dashboard
  • •No additional engine or performance issues present
  • •Warning light persists after oil change or service

Diagnostic Steps

  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
  6. 6

Solution

Verification

After completing the repair, verify that the issue has been resolved:

  • ✓Test the affected component to ensure it functions correctly
  • ✓Check for any error codes or warning lights
  • ✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

  • •Follow the manufacturer's recommended maintenance schedule
  • •Address warning signs early before they develop into major issues
  • •Use quality parts and fluids recommended for your vehicle
  • •Keep detailed records of all repairs and maintenance

Tools & Equipment Required

  • •None

Parts Required

  • •None

Additional Information

Affected Component
Electrical
Estimated Time
10-15 minutes
Difficulty
easy
Severity
low
Tools Required
1 item
Parts Required
1 item

Related Faults

Loading...

Share this solution

Comments

Sign in to share your thoughts

Sign In

No comments yet

Be the first to share your thoughts

Back to Generation
Solution
1. Preparation
  • Ensure the vehicle is parked on a level surface.
  • Gather necessary tools: none required for this procedure.
2. Reset Maintenance Light

  1. Turn Off Ignition:

    • Ensure the ignition is completely turned off.

  2. Press and Hold Reset Button:

    • Locate the trip meter reset button on the dashboard and press it.

  3. Turn Ignition On:

    • With the trip meter reset button still pressed, turn the ignition key to the "On" position (do not start the engine).

  4. Wait for Reset Confirmation:

    • Keep holding the button until the maintenance light turns off and the odometer reads "000000."

  5. Release and Verify:

    • Release the trip meter button, turn the ignition off, then start the engine to confirm the maintenance light is reset.