FAULTBASE
Error CodesASKCars
© 2026 FAULTBASE
All rights reserved.
v2.0.0 • Production
ContactPrivacyImpressum
how to reset the maintenance light in my Toyota Corolla E140 (2006-2013) - Toyota Corolla
Home/Cars/Toyota/Corolla/E140 (2006-2013)/how to reset the maintenance light in my Toyota Corolla E140 (2006-2013)

how to reset the maintenance light in my Toyota Corolla E140 (2006-2013)

Toyota Corolla E140 (2006-2013)

Error Codes
10 minutes
Time
easy
Difficulty
low
Severity
Navigation
ProblemSymptomsDiagnosisSolution
ProblemSymptomsDiagnosisSolution
3 min read
412 words

Problem Statement

Learn how to reset the maintenance light in your 2006-2013 Toyota Corolla E140 with this step-by-step guide. Quick and easy instructions included.

Affected Component
Electrical
Estimated Time
10 minutes

⚠️ Safety Warnings

Important safety information - read before proceeding

  • •Ensure the vehicle is in a safe location before performing the reset.

Symptoms

  • •Maintenance light illuminated on the dashboard
  • •Reminder message displayed on the multi-information display
  • •No other driveability issues present

Diagnostic Steps

  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
  6. 6
  7. 7

Solution

Verification

After completing the repair, verify that the issue has been resolved:

  • ✓Test the affected component to ensure it functions correctly
  • ✓Check for any error codes or warning lights
  • ✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

  • •Follow the manufacturer's recommended maintenance schedule
  • •Address warning signs early before they develop into major issues
  • •Use quality parts and fluids recommended for your vehicle
  • •Keep detailed records of all repairs and maintenance

Tools & Equipment Required

  • •None specifically required for this procedure.

Parts Required

  • •None required.

Additional Information

Affected Component
Electrical
Estimated Time
10 minutes
Difficulty
easy
Severity
low
Tools Required
1 item
Parts Required
1 item

Related Faults

Loading...

Share this solution

Comments

Sign in to share your thoughts

Sign In

No comments yet

Be the first to share your thoughts

Back to Generation
Solution
1. Preparation
  • Ensure the vehicle is parked on a flat surface.
  • Gather necessary tools (if applicable).
2. Reset Maintenance Light

  1. Turn the Ignition Off

    • Ensure the key is turned to the "OFF" position.

  2. Select Odometer Display

    • Press the odometer/trip meter button until the odometer display shows the total mileage.

  3. Press and Hold the Button

    • With the odometer displayed, press and hold the odometer/trip meter button.

  4. Turn the Ignition On

    • While holding the button, turn the ignition key to the "ON" position without starting the engine.

  5. Wait for the Light to Reset

    • Continue holding the button until the maintenance light blinks and then goes off (this may take around 10 seconds).

  6. Release the Button

    • Once the light is off, release the odometer/trip meter button.

  7. Turn Off Ignition

    • Turn the ignition back to the "OFF" position and then start the engine to confirm the light is reset.