FAULTBASE
Error CodesASKCars
© 2026 FAULTBASE
All rights reserved.
v2.0.0 • Production
ContactPrivacyImpressum
why does my Toyota Corolla E140 (2006-2013) smell like gas when I drive - Toyota Corolla
Home/Cars/Toyota/Corolla/E140 (2006-2013)/why does my Toyota Corolla E140 (2006-2013) smell like gas when I drive

why does my Toyota Corolla E140 (2006-2013) smell like gas when I drive

Toyota Corolla E140 (2006-2013)

Error Codes
2-4 hours
Time
medium
Difficulty
high
Severity
Navigation
ProblemSymptomsDiagnosisSolution
ProblemSymptomsDiagnosisSolution
3 min read
516 words

⚠️ Safety Warning

This issue requires immediate attention. If you are not experienced with automotive repairs, consult a professional mechanic. Working on critical systems can be dangerous.

Problem Statement

Learn how to diagnose and fix gasoline smell issues in Toyota Corolla E140 (2006-2013). Step-by-step guide with diagnostic procedures and repair instructions.

Affected Component
Fuel System
Estimated Time
2-4 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

  • •Always disconnect the battery before working on the fuel system.
  • •Allow the engine to cool before inspecting fuel components.
  • •Work in a well-ventilated area due to the risk of fire from gasoline vapors.

Symptoms

  • •Gasoline smell inside the cabin or around the exterior of the vehicle
  • •Decreased fuel efficiency
  • •Check engine light illuminated
  • •Presence of fuel puddles or stains under the vehicle
  • •Engine misfire or rough idling

Diagnostic Steps

  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
  6. 6

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

  • ✓Test the affected component to ensure it functions correctly
  • ✓Check for any error codes or warning lights
  • ✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

  • •Follow the manufacturer's recommended maintenance schedule
  • •Address warning signs early before they develop into major issues
  • •Use quality parts and fluids recommended for your vehicle
  • •Keep detailed records of all repairs and maintenance

Tools & Equipment Required

  • •Socket set
  • •Screwdriver set
  • •OBD-II scanner
  • •Fuel pressure gauge

Parts Required

  • •Fuel injector seals
  • •New fuel injectors
  • •Fuel pressure regulator
  • •Replacement fuel lines
  • •Fuel tank

Additional Information

Affected Component
Fuel System
Estimated Time
2-4 hours
Difficulty
medium
Severity
high
Tools Required
4 items
Parts Required
5 items

Related Faults

Loading...

Share this solution

Comments

Sign in to share your thoughts

Sign In

No comments yet

Be the first to share your thoughts

Back to Generation
Solution
1. Preparation
  • Gather necessary tools and materials.
  • Tools Required:
    • Socket set
    • Screwdriver set
    • OBD-II scanner
    • Fuel pressure gauge
  • Ensure the vehicle is parked in a well-ventilated area and the engine is cool.
2. Inspect Fuel Lines
  • Visually check all fuel lines from the fuel tank to the engine.
  • Look for cracks, loose connections, or signs of wear.
  • If a leak is detected, mark the area for replacement.
3. Check Fuel Injectors
  • Remove the engine cover (if applicable) to access the fuel injectors.
  • Inspect injector seals for any signs of fuel leakage.
  • If leaking, replace the faulty injectors or seals.
4. Examine Fuel Tank
  • Safely lift the vehicle using jack stands.
  • Inspect the fuel tank for any signs of damage or corrosion.
  • If damage is present, consider replacing the fuel tank.
5. Test Fuel Pressure Regulator
  • Connect a fuel pressure gauge to the fuel rail.
  • Start the engine and observe the pressure reading. It should be within manufacturer specifications (typically around 40-50 PSI).
  • If pressure is low, replace the fuel pressure regulator.