how to fix my Toyota Corolla E170 (2013-2019) if it won't go into gear

Toyota Corolla E170 (2013-2019)

Error Codes

2-4 hours

Time

medium

Difficulty

high

Severity

3 min read

563 words

⚠️ Safety Warning

This issue requires immediate attention. If you are not experienced with automotive repairs, consult a professional mechanic. Working on critical systems can be dangerous.

Problem Statement

Learn how to diagnose and fix transmission issues in the 2013-2019 Toyota Corolla E170. Step-by-step guide with symptoms, diagnostic steps, and repair instructions.

Affected Component

Transmission

Estimated Time

2-4 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

•Disconnect the battery before working on electrical systems.
•Allow the engine to cool before opening any fluid reservoirs.

Symptoms

•Transmission warning light illuminated
•Difficulty shifting into gear
•Grinding noise when attempting to shift
•Engine revs without acceleration
•Fluid leakage under the vehicle
•Transmission slipping while in gear

Diagnostic Steps

1
Scan the vehicle with an OBD-II scanner for any error codes related to the transmission.
2
Check the transmission fluid level and condition (color and smell).
3
Inspect the transmission linkage for damage or misalignment.
4
Test the clutch pedal operation (if applicable) to ensure it fully disengages.
5
Examine the transmission fluid lines for leaks or blockages.
6
Check the battery voltage and connections to ensure proper electrical supply to the transmission.

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•OBD-II scanner
•Socket set
•Torque wrench
•Transmission fluid pump
•Screwdriver set
•Multimeter

Parts Required

•Transmission fluid (specific to Toyota specifications)
•Clutch fluid (if applicable)

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Scan the vehicle with an OBD-II scanner for any error codes related to the transmission.
2
Check the transmission fluid level and condition (color and smell).
3
Inspect the transmission linkage for damage or misalignment.
4
Test the clutch pedal operation (if applicable) to ensure it fully disengages.
5
Examine the transmission fluid lines for leaks or blockages.
6
Check the battery voltage and connections to ensure proper electrical supply to the transmission.

Solution

1. Preparation

Gather tools and parts.
Ensure the vehicle is parked on a flat surface and securely supported with jack stands.
Disconnect the battery to prevent electrical shorts.

Tools Required:

OBD-II scanner
Socket set
Torque wrench
Transmission fluid pump
Screwdriver set
Multimeter

2. Check and Replace Transmission Fluid

Sub-steps:
1. Locate the transmission dipstick or fill plug.
2. Remove the dipstick or fill plug and check the fluid level.
3. If low, use a transmission fluid pump to add the appropriate type of fluid (consult owner’s manual for specifications).
4. If fluid is dark or has a burnt smell, drain the old fluid using a drain pan, and replace it with fresh fluid.
5. Reinstall the dipstick or fill plug securely.

3. Inspect and Adjust Transmission Linkage

Sub-steps:
1. Locate the transmission linkage assembly.
2. Visually inspect for wear, damage, or misalignment.
3. If misaligned, adjust the linkage according to the specifications in the repair manual.
4. Tighten all fasteners to the required torque specification.

4. Check Clutch Operation (Manual Transmission)

Sub-steps:
1. Inspect the clutch pedal for free play and ensure it operates smoothly.
2. If the clutch master cylinder is low on fluid, top off with the correct brake fluid.
3. If the clutch is not disengaging completely, consider bleeding the clutch system to remove air.

5. Electrical Check

Sub-steps:
1. Use a multimeter to check the voltage at the transmission control module.
2. Ensure all wiring and connectors are secure and free from corrosion.
3. If voltage is not present, trace the wiring for shorts or breaks.