how to fix my Toyota Corolla E170 (2013-2019) transmission jerking issue?

Toyota Corolla E170 (2013-2019)

Error Codes

2-4 hours

Time

medium

Difficulty

high

Severity

4 min read

646 words

⚠️ Safety Warning

This issue requires immediate attention. If you are not experienced with automotive repairs, consult a professional mechanic. Working on critical systems can be dangerous.

Problem Statement

Learn how to diagnose and fix transmission jerking issues in 2013-2019 Toyota Corolla E170. Step-by-step guide with symptoms, diagnostic steps, and repair instructions.

Affected Component

Transmission

Estimated Time

2-4 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

•Disconnect the battery to prevent electrical shorts.

Symptoms

•Transmission jerking during acceleration
•Unusual noise during shifting (clunking or grinding)
•Check engine light illuminated
•Delayed or harsh shifts between gears
•Decreased fuel efficiency
•Fluid leaks underneath the vehicle

Diagnostic Steps

1
Scan the vehicle’s onboard computer for error codes using an OBD-II scanner.
2
Check the transmission fluid level and condition (color and smell).
3
Inspect transmission mounts for wear or damage.
4
Examine the throttle position sensor for proper function.
5
Test the transmission solenoids for electrical and mechanical performance.
6
Verify if the battery and electrical connections are secure and free of corrosion.

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•OBD-II scanner
•Transmission fluid pump
•Floor jack
•Socket set
•Multimeter
•Drain pan

Parts Required

•Automatic transmission fluid (ATF)
•Transmission filter (if applicable)
•Transmission mounts (if needed)
•Throttle position sensor (if faulty)
•Transmission solenoids (if faulty)

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Scan the vehicle’s onboard computer for error codes using an OBD-II scanner.
2
Check the transmission fluid level and condition (color and smell).
3
Inspect transmission mounts for wear or damage.
4
Examine the throttle position sensor for proper function.
5
Test the transmission solenoids for electrical and mechanical performance.
6
Verify if the battery and electrical connections are secure and free of corrosion.

Solution

1. Preparation

Gather necessary tools and parts.
Ensure the vehicle is parked on a level surface and engage the parking brake.
Disconnect the battery to prevent electrical shorts.

2. Fluid Check and Change

Tools Required: Transmission fluid pump, socket set, drain pan, funnel
Sub-steps:
1. Locate the transmission dipstick or fill plug.
2. Remove the dipstick or fill plug and check fluid level with the engine running.
3. If the fluid is low, add the correct type of automatic transmission fluid (ATF) as specified in the owner's manual.
4. If the fluid is dark or has a burnt smell, drain the transmission fluid completely.
5. Replace the transmission filter if applicable and refill with new ATF.

3. Inspect and Replace Transmission Mounts

Tools Required: Floor jack, jack stands, socket set
Sub-steps:
1. Use a floor jack to support the transmission.
2. Remove the bolts securing the transmission mounts to the chassis and transmission.
3. Inspect the mounts for cracks or excessive wear.
4. Replace any damaged mounts with new ones.
5. Reinstall the mounts and torque to manufacturer specifications.

4. Check and Replace Throttle Position Sensor

Tools Required: Multimeter, socket set
Sub-steps:
1. Locate the throttle position sensor on the throttle body.
2. Disconnect the sensor’s electrical connector.
3. Use a multimeter to test the sensor’s output voltage according to manufacturer specifications.
4. If the sensor is faulty, remove it and replace it with a new one.
5. Reconnect the electrical connector and clear any diagnostic trouble codes.

5. Test Transmission Solenoids

Tools Required: Multimeter, service manual
Sub-steps:
1. Access the transmission solenoids by removing the transmission pan (if necessary).
2. Inspect the solenoids for signs of wear or damage.
3. Use a multimeter to test the resistance of each solenoid against specifications in the service manual.
4. Replace any malfunctioning solenoids and reassemble the transmission pan with a new gasket.