how to fix P0700 code in Toyota Corolla E170 (2013-2019)

Toyota Corolla E170 (2013-2019)

Error Codes

2-4 hours

Time

medium

Difficulty

high

Severity

Error Code: P0700

3 min read

547 words

⚠️ Safety Warning

This issue requires immediate attention. If you are not experienced with automotive repairs, consult a professional mechanic. Working on critical systems can be dangerous.

Problem Statement

Learn how to diagnose and fix P0700 transmission control system malfunction in Toyota Corolla E170. Step-by-step guide with diagnostic procedures and repair instructions.

Error Code

P0700

Affected Component

Transmission

Estimated Time

2-4 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

•Disconnect the battery before working on electrical systems to prevent shorts.
•Allow the engine to cool before working on the transmission system.

Symptoms

•Check engine light illuminated
•Harsh or erratic shifting
•Transmission slipping or failure to engage
•Decreased fuel efficiency
•Vehicle entering limp mode
•Unusual noises from the transmission area

Diagnostic Steps

1
Scan the vehicle's onboard diagnostics using an OBD-II scanner to retrieve any specific transmission-related trouble codes.
2
Inspect the transmission fluid level and condition; check for contamination or burnt smell.
3
Examine wiring and connectors leading to the transmission control module (TCM) for damage or loose connections.
4
Test the transmission control module for faults using a multimeter.
5
Check for any software updates available for the vehicle's engine control unit (ECU) and TCM.
6
Verify the operation of the vehicle speed sensor and other related sensors.

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•OBD-II scanner
•Socket set
•Torque wrench
•Multimeter
•Screwdriver set

Parts Required

•Transmission fluid (Toyota ATF WS)
•Transmission filter (if needed)
•Transmission control module (if faulty)

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Scan the vehicle's onboard diagnostics using an OBD-II scanner to retrieve any specific transmission-related trouble codes.
2
Inspect the transmission fluid level and condition; check for contamination or burnt smell.
3
Examine wiring and connectors leading to the transmission control module (TCM) for damage or loose connections.
4
Test the transmission control module for faults using a multimeter.
5
Check for any software updates available for the vehicle's engine control unit (ECU) and TCM.
6
Verify the operation of the vehicle speed sensor and other related sensors.

Solution

1. Preparation

Gather tools and parts needed for the repair.
Disconnect the battery to avoid electrical shorts.
Ensure the vehicle is on a level surface and secure it with wheel chocks.

2. Inspect and Replace Transmission Fluid

Sub-steps:
1. Remove the transmission fluid drain plug using a socket set and drain the old fluid into a suitable container.
2. Replace the transmission fluid filter, if applicable, by removing the transmission pan (if necessary).
3. Reinstall the drain plug and torque it to manufacturer specifications (typically 30 Nm).
4. Refill the transmission with the appropriate type of fluid (typically Toyota ATF WS) through the dipstick tube.

3. Repair or Replace TCM

Sub-steps:
1. Locate the transmission control module, usually found near the transmission or under the dashboard.
2. Disconnect the wiring harness from the TCM.
3. Remove the TCM mounting screws with a socket set and take out the module.
4. Install the new or repaired TCM by reversing the removal steps.
5. Reconnect the wiring harness securely.

4. Clear Codes and Test Drive

Sub-steps:
1. Reconnect the battery.
2. Use the OBD-II scanner to clear any trouble codes.
3. Start the engine and allow it to reach operating temperature.
4. Perform a test drive to ensure proper shifting and no recurrence of the P0700 code.