how to fix P0700 code in Toyota Corolla E170 (2013-2019)

Toyota Corolla E170 (2013-2019)

Error Codes

2-4 hours

Time

medium

Difficulty

high

Severity

Error Code: P0700

3 min read

560 words

⚠️ Safety Warning

This issue requires immediate attention. If you are not experienced with automotive repairs, consult a professional mechanic. Working on critical systems can be dangerous.

Problem Statement

Learn how to diagnose and fix P0700 transmission control system malfunction in Toyota Corolla E170. Step-by-step guide with diagnostic procedures and repair instructions.

Error Code

P0700

Affected Component

Transmission

Estimated Time

2-4 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

•Disconnect the battery before working on electrical systems.
•Allow the engine to cool before touching any components.

Symptoms

•Check engine light illuminated
•Erratic shifting or harsh transmission behavior
•Delayed engagement when shifting from park to drive
•Transmission slipping or failing to shift
•Poor fuel economy
•Increased engine RPM without vehicle acceleration

Diagnostic Steps

1
Scan the vehicle using an OBD-II scanner to retrieve any additional trouble codes.
2
Inspect the transmission fluid level and condition, ensuring it is at the appropriate level and not burnt.
3
Check the wiring and connections to the transmission control module (TCM) for damage or corrosion.
4
Test the TCM for proper functionality using a multimeter to measure voltage and ground signals.
5
Inspect the transmission solenoids for proper operation by testing resistance and functionality.
6
Check for any pending codes or history codes that may provide further insight into the problem.

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•OBD-II scanner
•Multimeter
•Socket set
•Torque wrench
•Hydraulic jack and jack stands

Parts Required

•Transmission fluid (Toyota ATF WS)
•Transmission control module (if needed)
•Transmission solenoids (if needed)
•Transmission pan gasket (if pan removal is required)

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Scan the vehicle using an OBD-II scanner to retrieve any additional trouble codes.
2
Inspect the transmission fluid level and condition, ensuring it is at the appropriate level and not burnt.
3
Check the wiring and connections to the transmission control module (TCM) for damage or corrosion.
4
Test the TCM for proper functionality using a multimeter to measure voltage and ground signals.
5
Inspect the transmission solenoids for proper operation by testing resistance and functionality.
6
Check for any pending codes or history codes that may provide further insight into the problem.

Solution

1. Preparation

Gather all necessary tools and parts.
Disconnect the vehicle battery to ensure safety.
Raise the vehicle using a hydraulic jack and secure it with jack stands.

2. Inspect Transmission Fluid

Remove the transmission dipstick and check the fluid level.
If fluid is low, add the correct type of Toyota transmission fluid (typically ATF WS) to the appropriate level.
If the fluid is burnt or contaminated, proceed to drain and replace the fluid.

3. Check and Repair Wiring

Visually inspect wiring and connectors related to the TCM and transmission solenoids for any signs of wear, corrosion, or damage.
Repair or replace any damaged wiring/ connectors identified.

4. Test Transmission Control Module

Locate the TCM, which is typically found near the transmission.
Disconnect the TCM connector and use a multimeter to check for proper voltage and ground according to the service manual specifications.
If the TCM is faulty, replace it with a new unit and reprogram it if necessary.

5. Inspect and Replace Solenoids

Access the transmission solenoids, which may require removing the transmission pan.
Test the solenoids for resistance using a multimeter; replace any that are out of spec.
Reinstall the transmission pan with a new gasket and refill the transmission fluid.