how to fix P0700 transmission code in Toyota Corolla E170 (2013-2019)

Toyota Corolla E170 (2013-2019)

Error Codes

2-4 hours

Time

medium

Difficulty

high

Severity

Error Code: P0700

4 min read

611 words

⚠️ Safety Warning

This issue requires immediate attention. If you are not experienced with automotive repairs, consult a professional mechanic. Working on critical systems can be dangerous.

Problem Statement

Learn how to diagnose and fix P0700 transmission control malfunction in Toyota Corolla E170 (2013-2019). Step-by-step guide with diagnostic procedures and repair instructions.

Error Code

P0700

Affected Component

Transmission

Estimated Time

2-4 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

•Disconnect the battery before working on electrical systems.
•Allow the engine to cool before opening the transmission pan to avoid burns.

Symptoms

•Check engine light illuminated
•Erratic shifting or harsh shifting
•Transmission slipping or loss of power
•Transmission not engaging in gear
•Decreased fuel efficiency
•Possible overheating of the transmission fluid

Diagnostic Steps

1
Scan for error codes using an OBD-II scanner to confirm P0700 and check for additional transmission-related codes.
2
Inspect transmission fluid level and quality; look for contamination or burnt smell.
3
Check the wiring and connectors associated with the transmission control module for damage or corrosion.
4
Inspect the transmission control module (TCM) for any visible signs of damage or failure.
5
Test the TCM using a multimeter to check for proper voltage and ground signals.
6
Erase the codes and conduct a test drive to see if the P0700 code reappears.

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•OBD-II scanner
•Socket set
•Multimeter
•Transmission fluid
•Funnel
•Torque wrench
•Safety glasses
•Gloves

Parts Required

•Transmission fluid
•Transmission control module (if replacement is necessary)

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Scan for error codes using an OBD-II scanner to confirm P0700 and check for additional transmission-related codes.
2
Inspect transmission fluid level and quality; look for contamination or burnt smell.
3
Check the wiring and connectors associated with the transmission control module for damage or corrosion.
4
Inspect the transmission control module (TCM) for any visible signs of damage or failure.
5
Test the TCM using a multimeter to check for proper voltage and ground signals.
6
Erase the codes and conduct a test drive to see if the P0700 code reappears.

Solution

1. Preparation

Tools Required: OBD-II scanner, socket set, multimeter, transmission fluid, funnel, torque wrench, safety glasses, gloves.
Ensure the vehicle is on a level surface and the engine is off before beginning work.

2. Check and Replace Transmission Fluid

Inspect Fluid Level:
- Remove the transmission dipstick and wipe it clean.
- Reinsert and remove the dipstick to check fluid level. Add fluid if low.
Replace Fluid if Contaminated:
- Place a drain pan under the transmission pan.
- Remove the transmission pan bolts using a socket set and carefully lower the pan.
- Replace the old fluid with new, manufacturer-recommended transmission fluid.
- Reinstall the transmission pan and torque bolts to manufacturer specifications (typically around 10-15 ft-lbs).

3. Inspect and Repair Wiring

Visual Inspection:
- Check all wiring and connectors leading to the TCM.
- Repair any frayed or damaged wires and ensure all connections are secure.
Testing:
- Use a multimeter to check for continuity and proper grounding in the wiring harness.

4. Replace Transmission Control Module (if necessary)

Remove TCM:
- Disconnect the battery and remove the TCM connector.
- Remove the mounting bolts and gently pull the TCM from its bracket.
Install New TCM:
- Position the new TCM in place and secure it with mounting bolts.
- Reconnect the wiring harness and battery.

5. Clear Codes and Test Drive

Reset the System:
- Use the OBD-II scanner to clear the P0700 code from the system.
Test Drive:
- Drive the vehicle under various conditions to ensure the issue is resolved and monitor for any reoccurring codes.