FAULTBASE
Error CodesASKCars
© 2026 FAULTBASE
All rights reserved.
v2.0.0 • Production
ContactPrivacyImpressum
how to reset oil change light in Toyota Corolla E170 (2013-2019) - Toyota Corolla
Home/Cars/Toyota/Corolla/E170 (2013-2019)/how to reset oil change light in Toyota Corolla E170 (2013-2019)

how to reset oil change light in Toyota Corolla E170 (2013-2019)

Toyota Corolla E170 (2013-2019)

Error Codes
10-15 minutes
Time
easy
Difficulty
low
Severity
Navigation
ProblemSymptomsDiagnosisSolution
ProblemSymptomsDiagnosisSolution
2 min read
389 words

Problem Statement

Learn how to reset the oil change light in a 2013-2019 Toyota Corolla E170. Step-by-step guide with diagnostic steps and verification procedures.

Affected Component
Electrical
Estimated Time
10-15 minutes

⚠️ Safety Warnings

Important safety information - read before proceeding

  • •Ensure the vehicle is in a safe, level position before performing the reset.

Symptoms

  • •Oil change light remains illuminated on the dashboard
  • •Maintenance reminder message displayed on the instrument panel
  • •No engine performance issues (related to the reset process)

Diagnostic Steps

  1. 1
  2. 2
  3. 3
  4. 4

Solution

Verification

After completing the repair, verify that the issue has been resolved:

  • ✓Test the affected component to ensure it functions correctly
  • ✓Check for any error codes or warning lights
  • ✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

  • •Follow the manufacturer's recommended maintenance schedule
  • •Address warning signs early before they develop into major issues
  • •Use quality parts and fluids recommended for your vehicle
  • •Keep detailed records of all repairs and maintenance

Tools & Equipment Required

  • •Vehicle key
  • •Smart key

Parts Required

  • •None required for the reset process.

Additional Information

Affected Component
Electrical
Estimated Time
10-15 minutes
Difficulty
easy
Severity
low
Tools Required
2 items
Parts Required
1 item

Related Faults

Loading...

Share this solution

Comments

Sign in to share your thoughts

Sign In

No comments yet

Be the first to share your thoughts

Back to Generation
Solution
1. Preparation
  • Gather necessary materials: vehicle key or smart key.
  • Ensure the vehicle is in the "On" position without starting the engine.
2. Reset the Oil Change Light

  1. Access the Odometer Display:

    • Press the trip meter reset button until the odometer is displayed on the dashboard.

  2. Turn Off the Engine:

    • Turn the ignition off completely.

  3. Initiate the Reset Sequence:

    • While holding the trip meter reset button, turn the ignition back to the "On" position without starting the engine.

  4. Complete the Reset:

    • Continue holding the trip meter reset button until the oil change light blinks and then turns off (approximately 10 seconds).
    • Release the reset button.

  5. Verify Reset:

    • Turn the ignition off again, then start the engine to confirm that the oil change light is no longer illuminated.