FAULTBASE
Error CodesASKCars
© 2026 FAULTBASE
All rights reserved.
v2.0.0 • Production
ContactPrivacyImpressum
how to reset the maintenance light on a Toyota Corolla E170 (2013-2019) - Toyota Corolla
Home/Cars/Toyota/Corolla/E170 (2013-2019)/how to reset the maintenance light on a Toyota Corolla E170 (2013-2019)

how to reset the maintenance light on a Toyota Corolla E170 (2013-2019)

Toyota Corolla E170 (2013-2019)

Error Codes
5-10 minutes
Time
easy
Difficulty
low
Severity
Navigation
ProblemSymptomsDiagnosisSolution
ProblemSymptomsDiagnosisSolution
2 min read
383 words

Problem Statement

Learn how to reset the maintenance light on a 2013-2019 Toyota Corolla E170. Step-by-step guide with diagnostic procedures and instructions.

Affected Component
Electrical
Estimated Time
5-10 minutes

⚠️ Safety Warnings

Important safety information - read before proceeding

  • •Ensure the vehicle is stationary and in a safe location before resetting the maintenance light.

Symptoms

  • •Maintenance light is illuminated on the dashboard
  • •No other performance issues present
  • •Owner has completed required maintenance services

Diagnostic Steps

  1. 1
  2. 2
  3. 3
  4. 4
  5. 5

Solution

Verification

After completing the repair, verify that the issue has been resolved:

  • ✓Test the affected component to ensure it functions correctly
  • ✓Check for any error codes or warning lights
  • ✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

  • •Follow the manufacturer's recommended maintenance schedule
  • •Address warning signs early before they develop into major issues
  • •Use quality parts and fluids recommended for your vehicle
  • •Keep detailed records of all repairs and maintenance

Tools & Equipment Required

  • •Flathead screwdriver

Parts Required

  • •None

Additional Information

Affected Component
Electrical
Estimated Time
5-10 minutes
Difficulty
easy
Severity
low
Tools Required
1 item
Parts Required
1 item

Related Faults

Loading...

Share this solution

Comments

Sign in to share your thoughts

Sign In

No comments yet

Be the first to share your thoughts

Back to Generation
Solution
1. Preparation
  • Ensure the vehicle is parked safely and the ignition is off.
  • Gather any necessary tools, such as a flathead screwdriver (to access the trip meter reset button if needed).
2. Reset the Maintenance Light

  1. Power Off the Vehicle

    • Ensure the ignition is completely off.

  2. Access the Trip Meter Reset Button

    • Locate the trip meter reset button on the instrument panel, typically found near the speedometer.

  3. Engage the Reset Process

    • Press and hold the trip meter reset button.
    • While holding the button, turn the ignition key to the "ON" position (do not start the engine).

  4. Monitor the Maintenance Light

    • Continue holding the button until the maintenance light blinks and then turns off (this may take several seconds).

  5. Complete the Reset

    • Release the trip meter reset button.
    • Turn the ignition off, then start the vehicle to confirm the maintenance light is reset.