FAULTBASE
Error CodesASKCars
© 2026 FAULTBASE
All rights reserved.
v2.0.0 • Production
ContactPrivacyImpressum
how to reset the maintenance light on my Toyota Corolla E170 (2013-2019) - Toyota Corolla
Home/Cars/Toyota/Corolla/E170 (2013-2019)/how to reset the maintenance light on my Toyota Corolla E170 (2013-2019)

how to reset the maintenance light on my Toyota Corolla E170 (2013-2019)

Toyota Corolla E170 (2013-2019)

Error Codes
Less than 15 minutes
Time
easy
Difficulty
low
Severity
Navigation
ProblemSymptomsDiagnosisSolution
ProblemSymptomsDiagnosisSolution
2 min read
371 words

Problem Statement

Learn how to reset the maintenance light on your 2013-2019 Toyota Corolla E170. Step-by-step guide for a quick and easy reset process.

Affected Component
Electrical
Estimated Time
Less than 15 minutes

⚠️ Safety Warnings

Important safety information - read before proceeding

  • •Ensure the vehicle is in a safe, stationary position while performing the reset.

Symptoms

  • •Maintenance light illuminated on the dashboard
  • •Reminder for oil change or maintenance service displayed
  • •No other warning lights present

Diagnostic Steps

  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
  6. 6

Solution

Verification

After completing the repair, verify that the issue has been resolved:

  • ✓Test the affected component to ensure it functions correctly
  • ✓Check for any error codes or warning lights
  • ✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

  • •Follow the manufacturer's recommended maintenance schedule
  • •Address warning signs early before they develop into major issues
  • •Use quality parts and fluids recommended for your vehicle
  • •Keep detailed records of all repairs and maintenance

Tools & Equipment Required

  • •None required for this procedure.

Parts Required

  • •None required for this procedure.

Additional Information

Affected Component
Electrical
Estimated Time
Less than 15 minutes
Difficulty
easy
Severity
low
Tools Required
1 item
Parts Required
1 item

Related Faults

Loading...

Share this solution

Comments

Sign in to share your thoughts

Sign In

No comments yet

Be the first to share your thoughts

Back to Generation
Solution
1. Preparation
  • Gather necessary tools: none required.
  • Ensure the vehicle is parked in a safe area with the engine off.
2. Resetting the Maintenance Light
  1. Access the Odometer Button: Locate the odometer button on the instrument cluster.
  2. Turn Off Ignition: Ensure the vehicle is completely off.
  3. Press and Hold the Odometer Button: Press and hold the odometer button.
  4. Turn Ignition On: While holding the button, turn the ignition key to the "ON" position without starting the engine.
  5. Wait for the Light to Blink: Hold the button until the maintenance light blinks and then turns off (approximately 10 seconds).
  6. Release the Button: Let go of the odometer button.
  7. Turn Ignition Off: Switch the ignition to the "OFF" position.
  8. Confirm Reset: Start the engine to ensure the maintenance light is off.