how to reset the tire pressure light on my Toyota Corolla E170 (2013-2019)?

Toyota Corolla E170 (2013-2019)

30 minutes

Time

easy

Difficulty

medium

Severity

3 min read

422 words

Problem Statement

Learn how to reset the tire pressure light on your 2013-2019 Toyota Corolla E170. Follow our step-by-step guide for a quick and easy solution.

Affected Component

Electrical

Estimated Time

30 minutes

Important safety information - read before proceeding

1
Check the tire pressures of all four tires using a tire pressure gauge.
2
Inflate or deflate tires to the recommended pressure as indicated on the driver's side door jamb label.
3
Verify that the spare tire (if equipped with TPMS) is also properly inflated.
4
Turn the ignition to the 'ON' position without starting the engine.
5
Locate the TPMS reset button, typically found beneath the steering wheel or on the lower dashboard.
6
Press and hold the TPMS reset button until the tire pressure light blinks three times, then release the button.

After completing the repair, verify that the issue has been resolved:

To prevent this issue from occurring again:

No comments yet

Be the first to share your thoughts

Diagnostic Steps

1
Check the tire pressures of all four tires using a tire pressure gauge.
2
Inflate or deflate tires to the recommended pressure as indicated on the driver's side door jamb label.
3
Verify that the spare tire (if equipped with TPMS) is also properly inflated.
4
Turn the ignition to the 'ON' position without starting the engine.
5
Locate the TPMS reset button, typically found beneath the steering wheel or on the lower dashboard.
6
Press and hold the TPMS reset button until the tire pressure light blinks three times, then release the button.

Solution

1. Preparation

2. Reset the TPMS

Step 1: Turn the ignition key to the "ON" position (do not start the engine).
Step 2: Press and hold the TPMS reset button until the tire pressure warning light blinks three times.
Step 3: Release the button. The light should remain off if the reset is successful.
Step 4: Start the engine and check if the tire pressure light remains off. If it does not, repeat the reset process.