FAULTBASE
Error CodesASKCars
© 2026 FAULTBASE
All rights reserved.
v2.0.0 • Production
ContactPrivacyImpressum
my Toyota Corolla E170 (2013-2019) engine is idling rough, what should I check? - Toyota Corolla
Home/Cars/Toyota/Corolla/E170 (2013-2019)/my Toyota Corolla E170 (2013-2019) engine is idling rough, what should I check?

my Toyota Corolla E170 (2013-2019) engine is idling rough, what should I check?

Toyota Corolla E170 (2013-2019)

Error Codes
2-4 hours
Time
medium
Difficulty
medium
Severity
Navigation
ProblemSymptomsDiagnosisSolution
ProblemSymptomsDiagnosisSolution
3 min read
578 words

Problem Statement

Learn how to diagnose and fix rough idling in Toyota Corolla E170 (2013-2019). Step-by-step guide with symptoms, diagnostic steps, and repair instructions.

Affected Component
Engine
Estimated Time
2-4 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

  • •Disconnect the battery before working on electrical systems.
  • •Allow the engine to cool before opening any components.

Symptoms

  • •Check engine light illuminated
  • •Engine stalling at idle
  • •Unusual vibrations felt in the cabin
  • •Poor fuel economy
  • •Increased emissions
  • •Engine misfire during acceleration

Diagnostic Steps

  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
  6. 6

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

  • ✓Test the affected component to ensure it functions correctly
  • ✓Check for any error codes or warning lights
  • ✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

  • •Follow the manufacturer's recommended maintenance schedule
  • •Address warning signs early before they develop into major issues
  • •Use quality parts and fluids recommended for your vehicle
  • •Keep detailed records of all repairs and maintenance

Tools & Equipment Required

  • •OBD-II scanner
  • •Socket set
  • •Torque wrench
  • •Spark plug socket
  • •Throttle body cleaner
  • •Soft brush
  • •Microfiber cloth
  • •Fuel pressure gauge

Parts Required

  • •Spark plugs
  • •Fuel injector cleaner (if needed)
  • •Air filter (if needed)

Additional Information

Affected Component
Engine
Estimated Time
2-4 hours
Difficulty
medium
Severity
medium
Tools Required
8 items
Parts Required
3 items

Related Faults

Loading...

Share this solution

Comments

Sign in to share your thoughts

Sign In

No comments yet

Be the first to share your thoughts

Back to Generation
Solution
1. Preparation
  • Gather tools and parts.
  • Disconnect the negative battery terminal to ensure safety.
  • Allow the engine to cool if it has been running.
2. Inspect and Replace Spark Plugs
  • Tools Required: Socket set, torque wrench, spark plug socket.
  • Remove the ignition coils by unscrewing the bolts and disconnecting the electrical connectors.
  • Remove the old spark plugs using the spark plug socket.
  • Inspect the spark plug gaps and replace with new plugs if they are worn or dirty.
  • Torque the new spark plugs to the manufacturer’s specification (usually around 13-15 lb-ft).
  • Reinstall the ignition coils.
3. Clean Throttle Body
  • Tools Required: Throttle body cleaner, soft brush, microfiber cloth.
  • Remove the air intake duct to access the throttle body.
  • Spray throttle body cleaner into the throttle body and use a soft brush to gently clean any carbon buildup.
  • Wipe the area with a microfiber cloth to ensure all debris is removed.
  • Reattach the air intake duct.
4. Test and Clean Fuel Injectors
  • Tools Required: Fuel injector cleaner, fuel pressure gauge.
  • If a fuel injector cleaner is available, add it to the fuel tank as per the product instructions.
  • For advanced cleaning, consider removing injectors and using an ultrasonic cleaner.
  • Reinstall the injectors and ensure all connections are secure.
5. Check for Vacuum Leaks
  • Tools Required: Vacuum gauge, hose clamps.
  • Connect the vacuum gauge to the intake manifold and observe the reading.
  • If low, inspect hoses for cracks or disconnections and replace as necessary.
  • Tighten any loose clamps.