my Toyota Corolla E170 (2013-2019) has a strong smell of gasoline what should I check

Toyota Corolla E170 (2013-2019)

Error Codes

2-4 hours

Time

medium

Difficulty

high

Severity

3 min read

571 words

⚠️ Safety Warning

This issue requires immediate attention. If you are not experienced with automotive repairs, consult a professional mechanic. Working on critical systems can be dangerous.

Problem Statement

Learn how to diagnose and fix a strong gasoline smell in your Toyota Corolla E170 (2013-2019). Step-by-step guide with diagnostic procedures and repair instructions.

Affected Component

Fuel System

Estimated Time

2-4 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

•Disconnect battery before working on electrical systems.
•Allow engine to cool before starting work.
•Work in a well-ventilated area to avoid inhaling fuel vapors.
•Fuel lines are under pressure; relieve pressure before disconnecting any lines.

Symptoms

•Strong gasoline odor, especially near the fuel tank or engine bay
•Fuel leakage visible under the vehicle
•Engine misfire or rough idle
•Decreased fuel efficiency
•Fuel gauge reading inaccurately

Diagnostic Steps

1
Inspect the fuel lines for any visible leaks or damage.
2
Check the fuel injectors for signs of leakage or malfunction.
3
Examine the fuel tank for cracks, rust, or damage.
4
Use an OBD-II scanner to check for any related error codes.
5
Inspect the fuel pressure regulator for proper function.
6
Look for any loose or damaged connections in the fuel system.

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•Safety glasses
•Gloves
•Bucket for any spilled fuel
•OBD-II scanner
•Socket set
•Wrench set

Parts Required

•Replacement fuel injectors (if needed)
•Replacement fuel pressure regulator (if needed)
•Replacement fuel tank (if needed)
•Fuel line sections (if damaged)

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Inspect the fuel lines for any visible leaks or damage.
2
Check the fuel injectors for signs of leakage or malfunction.
3
Examine the fuel tank for cracks, rust, or damage.
4
Use an OBD-II scanner to check for any related error codes.
5
Inspect the fuel pressure regulator for proper function.
6
Look for any loose or damaged connections in the fuel system.

Solution

1. Preparation

Tools Required: Safety glasses, gloves, bucket for any spilled fuel.
Ensure the vehicle is parked on a flat surface, and the engine is cool.
Disconnect the negative terminal of the battery to prevent any electrical issues.

2. Inspect Fuel Lines

Sub-steps:
1. Locate the fuel lines running from the fuel tank to the engine.
2. Examine the lines for any signs of wear, cracks, or fuel seepage.
3. Tighten any loose fittings or replace damaged sections of the fuel line.
Safety Warning: Fuel lines are under pressure; relieve pressure before disconnecting any lines.

3. Check Fuel Injectors

Sub-steps:
1. Remove the engine cover if necessary to access the fuel injectors.
2. Perform a visual inspection for any fuel leakage around the injector seals.
3. If leaking, remove the faulty injector and replace it with a new one.
Tools Required: Socket set, new fuel injector(s).

4. Examine Fuel Tank

Sub-steps:
1. Inspect the fuel tank for any signs of damage or rust.
2. If damage is found, you may need to replace the fuel tank.
3. Check the fuel tank cap for proper sealing; replace if it is faulty.
Tools Required: Wrench set, replacement fuel tank (if needed).

5. Inspect Fuel Pressure Regulator

Sub-steps:
1. Locate the fuel pressure regulator (usually on the fuel rail).
2. Check for any fuel leaks from the regulator.
3. If leaking, remove and replace the fuel pressure regulator.
Tools Required: Wrench set, replacement fuel pressure regulator (if needed).