what are the common causes of ABS light activation in my Toyota Corolla E170 (2013-2019)

Toyota Corolla E170 (2013-2019)

Error Codes

1-2 hours

Time

medium

Difficulty

high

Severity

3 min read

530 words

⚠️ Safety Warning

This issue requires immediate attention. If you are not experienced with automotive repairs, consult a professional mechanic. Working on critical systems can be dangerous.

Problem Statement

Discover common causes for ABS light activation in Toyota Corolla E170 (2013-2019). Follow our diagnostic steps and solutions for effective repair.

Affected Component

Brakes

Estimated Time

1-2 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

•Disconnect the battery before working on the electrical system.
•Use jack stands when working under the vehicle for safety.

Symptoms

•ABS warning light illuminated on the dashboard
•Increased stopping distance
•Pulsation in the brake pedal during braking
•Loss of traction or stability control
•Brake system warning light may also be on

Diagnostic Steps

1
Scan the vehicle's onboard diagnostics system using an OBD-II scanner to retrieve any error codes related to the ABS.
2
Inspect the ABS fuses and relays for continuity and functionality.
3
Check the condition and connection of the ABS wheel speed sensors at each wheel.
4
Inspect brake fluid levels in the master cylinder reservoir.
5
Evaluate the ABS module for any visible signs of damage or corrosion.
6
Test the ABS pump operation for proper function.

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•OBD-II scanner
•Multimeter
•Socket set
•Brake fluid
•Safety glasses

Parts Required

•ABS fuse (if needed)
•ABS wheel speed sensor (if faulty)

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Scan the vehicle's onboard diagnostics system using an OBD-II scanner to retrieve any error codes related to the ABS.
2
Inspect the ABS fuses and relays for continuity and functionality.
3
Check the condition and connection of the ABS wheel speed sensors at each wheel.
4
Inspect brake fluid levels in the master cylinder reservoir.
5
Evaluate the ABS module for any visible signs of damage or corrosion.
6
Test the ABS pump operation for proper function.

Solution

1. Preparation

Gather tools and materials: OBD-II scanner, multimeter, socket set, brake fluid, and safety glasses.
Ensure the vehicle is parked on a flat surface and the ignition is off.
Disconnect the negative battery terminal to avoid electrical shock.

2. Inspect and Replace ABS Fuses

Locate the fuse box, typically found under the dashboard or in the engine compartment.
Identify the ABS fuse using the diagram on the fuse box cover.
Use a multimeter to check for continuity. If blown, replace with a fuse of the same amperage.

3. Check and Clean Wheel Speed Sensors

Raise the vehicle securely using jack stands.
Remove the wheel to access the ABS wheel speed sensor.
Disconnect the sensor connector and inspect for dirt or corrosion.
Clean the sensor with a soft cloth and reconnect. If damaged, replace the sensor.

4. Inspect Brake Fluid Level

Locate the brake master cylinder reservoir.
Check the brake fluid level. If low, top up with manufacturer-recommended brake fluid.
Inspect for any leaks in brake lines or at the master cylinder.

5. Test ABS Module

Reconnect the battery terminal.
Use the OBD-II scanner to clear any existing ABS codes.
Start the vehicle and perform a test drive to observe if the ABS light remains off.
If the light returns, the ABS module may require replacement.