what causes the check engine light to come on in my Toyota Corolla E170 (2013-2019)

Toyota Corolla E170 (2013-2019)

Error Codes

1-4 hours

Time

medium

Difficulty

medium

Severity

3 min read

469 words

Problem Statement

Learn how to diagnose and fix check engine light issues in Toyota Corolla E170 (2013-2019). Step-by-step guide with symptoms, diagnostic steps, and repair instructions.

Affected Component

Engine

Estimated Time

1-4 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

•Disconnect the battery before working on electrical components.
•Allow the engine to cool down before inspecting the exhaust system.

Symptoms

•Check engine light illuminated on the dashboard
•Engine running rough or misfiring
•Decreased fuel efficiency
•Increased exhaust emissions
•Unusual noises from the engine
•Smell of fuel or exhaust fumes

Diagnostic Steps

1
Scan for error codes using an OBD-II scanner to identify the specific trouble codes.
2
Check fluid levels, including oil, coolant, and transmission fluid.
3
Inspect the gas cap for damage or improper sealing.
4
Visually inspect the engine for loose or damaged wiring and vacuum hoses.
5
Test the battery and charging system to ensure proper voltage.
6
Perform a smoke test to check for vacuum leaks in the intake system.

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•OBD-II scanner
•Socket set
•Torque wrench
•Multimeter

Parts Required

•OEM gas cap
•Oxygen sensors (if required)
•Vacuum hoses or seals (if required)
•Catalytic converter (if required)

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Scan for error codes using an OBD-II scanner to identify the specific trouble codes.
2
Check fluid levels, including oil, coolant, and transmission fluid.
3
Inspect the gas cap for damage or improper sealing.
4
Visually inspect the engine for loose or damaged wiring and vacuum hoses.
5
Test the battery and charging system to ensure proper voltage.
6
Perform a smoke test to check for vacuum leaks in the intake system.

Solution

1. Preparation

Gather tools and materials needed for the repair.
Disconnect the negative battery terminal to ensure safety while working on the vehicle.

2. Address Error Codes

Sub-step 1: Refer to the OBD-II scanner results and note the trouble codes.
Sub-step 2: Research each code to determine the affected components (e.g., oxygen sensors, catalytic converter).
Sub-step 3: Clear the codes and take the vehicle for a test drive to see if the check engine light returns.

3. Inspect and Replace Components

Sub-step 1: If a faulty gas cap is indicated, replace it with a new OEM gas cap.
Sub-step 2: If oxygen sensors are faulty, locate and replace the affected sensors, ensuring correct torque specifications.
Sub-step 3: For any identified vacuum leaks, replace damaged hoses or seals.

4. Recheck Emissions System

Sub-step 1: If the catalytic converter is suspected, perform a backpressure test to confirm functionality.
Sub-step 2: If necessary, replace the catalytic converter, ensuring proper fitment and sealing.