why does my Toyota Corolla E170 (2013-2019) make a grinding noise when braking

Toyota Corolla E170 (2013-2019)

Error Codes

2-4 hours

Time

medium

Difficulty

high

Severity

3 min read

553 words

⚠️ Safety Warning

This issue requires immediate attention. If you are not experienced with automotive repairs, consult a professional mechanic. Working on critical systems can be dangerous.

Problem Statement

Learn how to diagnose and fix grinding noise when braking in Toyota Corolla E170 (2013-2019). Step-by-step guide with diagnostic procedures and repair instructions.

Affected Component

Brakes

Estimated Time

2-4 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

•Always disconnect the battery before working on electrical systems.
•Allow the vehicle to cool down before starting work on the brakes.

Symptoms

•Grinding noise when applying brakes
•Reduced braking efficiency
•Vibration in the brake pedal
•Brake warning light illuminated
•Uneven wear on brake pads

Diagnostic Steps

1
Inspect brake pads for wear and damage.
2
Check brake rotors for scoring or warping.
3
Examine brake calipers for proper function and movement.
4
Inspect brake lines for leaks or wear.
5
Scan for any error codes related to the braking system using an OBD-II scanner.

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•Jack
•Jack stands
•Lug wrench
•Socket set
•Torque wrench
•Brake cleaner
•Anti-squeal lubricant

Parts Required

•New brake pads
•New brake rotors

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Solution

1. Preparation

Gather necessary tools and safety equipment.
Ensure the vehicle is parked on a level surface and the parking brake is engaged.
Use jack stands to secure the vehicle after lifting.

2. Remove Wheel and Brake Components

Tools Required: Jack, jack stands, lug wrench, socket set.
Loosen the lug nuts while the wheel is on the ground.
Raise the vehicle with the jack and secure it with jack stands.
Remove the lug nuts and take off the wheel to access the brake assembly.

3. Inspect and Replace Brake Pads

Inspect the brake pads for wear; if they are less than 1/8 inch thick or have uneven wear, replace them.
Tools Required: Torque wrench, brake cleaner, anti-squeal lubricant.
Remove the caliper bolts using a socket set.
Slide the caliper off the rotor and support it without straining the brake line.
Remove the old brake pads and clean the caliper bracket with brake cleaner.
Install new brake pads, ensuring they are seated properly.

4. Check and Resurface or Replace Brake Rotors

Inspect the brake rotors for grooves, scoring, or unevenness.
If the rotors are damaged, resurface them or replace them with new rotors.
Tools Required: Brake rotor tool, torque wrench.
If resurfacing, follow the manufacturer's specifications for thickness.
If replacing, ensure the new rotors are installed correctly and torque the mounting bolts to the specified value.

5. Reassemble and Test Brakes

Reinstall the caliper over the new brake pads and secure it with the caliper bolts.
Reattach the wheel and hand-tighten the lug nuts.
Lower the vehicle and fully tighten the lug nuts in a star pattern to the manufacturer’s torque specifications.
Test the brakes by gently pressing the pedal to ensure proper engagement before driving.