why does my Toyota Corolla E170 (2013-2019) transmission slip when accelerating

Toyota Corolla E170 (2013-2019)

Error Codes

2-4 hours

Time

medium

Difficulty

high

Severity

3 min read

560 words

⚠️ Safety Warning

This issue requires immediate attention. If you are not experienced with automotive repairs, consult a professional mechanic. Working on critical systems can be dangerous.

Problem Statement

Learn how to diagnose and fix transmission slipping in Toyota Corolla E170 (2013-2019). Step-by-step guide with symptoms, diagnostic steps, and repair instructions.

Affected Component

Transmission

Estimated Time

2-4 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

•Disconnect the battery before working on electrical systems.
•Allow the engine and transmission to cool before servicing.

Symptoms

•Transmission engages late or not at all when accelerating
•Engine RPMs increase without corresponding vehicle acceleration
•Unusual noises, such as whining or grinding, during gear changes
•Warning light illuminated on the dashboard
•Harsh or abrupt shifting between gears
•Fluid leakage under the vehicle

Diagnostic Steps

1
Scan for error codes using an OBD-II scanner to identify transmission-related issues.
2
Check transmission fluid level and condition; look for discoloration or burnt smell.
3
Inspect the transmission filter for clogs or damage.
4
Examine the transmission linkage and cable for proper adjustment and functionality.
5
Test the transmission solenoid operation using a multimeter to ensure they are functioning correctly.
6
Look for external leaks or damage to the transmission casing.

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•OBD-II scanner
•Socket set
•Multimeter
•Torque wrench
•Transmission fluid pump

Parts Required

•Transmission fluid (Toyota ATF WS)
•Transmission filter
•Transmission pan gasket
•Transmission solenoids (if needed)

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Symptoms

•Transmission engages late or not at all when accelerating

•Engine RPMs increase without corresponding vehicle acceleration

•Unusual noises, such as whining or grinding, during gear changes

•Warning light illuminated on the dashboard

•Harsh or abrupt shifting between gears

•Fluid leakage under the vehicle

Diagnostic Steps

1
Scan for error codes using an OBD-II scanner to identify transmission-related issues.
2
Check transmission fluid level and condition; look for discoloration or burnt smell.
3
Inspect the transmission filter for clogs or damage.
4
Examine the transmission linkage and cable for proper adjustment and functionality.
5
Test the transmission solenoid operation using a multimeter to ensure they are functioning correctly.
6
Look for external leaks or damage to the transmission casing.

Solution

1. Preparation

Gather tools including an OBD-II scanner, socket set, multimeter, and transmission fluid.
Ensure the vehicle is parked on a level surface and the engine is cool.
Disconnect the battery to prevent electrical shorts.

2. Check and Replace Transmission Fluid

Check Fluid Level:
- Remove the transmission dipstick and wipe it clean.
- Reinsert the dipstick and remove it again to check the fluid level.
Replace Fluid:
- If fluid is low, add the recommended transmission fluid type (typically Toyota ATF WS).
- If fluid is dark or burnt, drain the transmission fluid completely.
- Remove the drain plug and allow fluid to drain into a pan.
- Replace the drain plug and refill with the correct type and amount of transmission fluid through the dipstick tube.

3. Inspect and Replace Transmission Filter

Remove Transmission Pan:
- Raise the vehicle securely on jack stands.
- Remove the bolts securing the transmission pan and carefully lower it.
Replace Filter:
- Remove the old filter and replace it with a new one, ensuring proper alignment.
- Clean the transmission pan and the gasket surface before reassembly.
Reinstall Pan:
- Install the pan with a new gasket and torque bolts to manufacturer specifications.

4. Test and Replace Transmission Solenoids (if needed)

Test Solenoids:
- Disconnect the electrical connectors from the solenoids.
- Use a multimeter to check the resistance; compare with manufacturer specifications.
Replace Solenoids:
- If solenoids are faulty, remove them and install new ones by reversing the removal steps.